COMPLIANCE INFO_2011-2015 - Laserfiche WebLink

Home Browse Search

S WEB,January 2002 Page!2_of_2 6. PIPING SUMP TESTING Test Method Developed By: ❑ Sump Manufacturer ®Industry Standard ❑Professional Engineer ❑ Other(Spec) Test Method Used: ❑Pressure ❑Vacuum ®Hydrostatic ❑Other(Specify) oTestEquipomentd:INCON SUMP TESTER Equipment Resolution:+/'-0.002" Sump#LTC Sump# Sump# Sump# 48°53.50" Sump Material: FIBERGLASS Height from Tank Top to Top of 33" Hi hest Pi ing Penetration: Height from Tank Top to Lowest 20" Electrical Penetration: Condition of sump prior to testing: DRY Portion of Sump Tested' PENETRATIONS Does turbine shut down when sump sensor detects liquid(both ❑Yes ❑No ®NA ❑Yes ❑No [:INA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA product and water)?* Turbine shutdown response time N/A IS system programmed for fail-safe shutdown?* ❑,Yes [:1No ®NA ElYes [:1No [:1NA ElYes ElNo [:1NA [:]yes ❑No ❑NA Was fail-safe verified to be o erational?* ❑Yes ❑No ®NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA [:]Yes ❑No DNA Wait time between applying pressure/vacuum/water and starting 10 MIN test: Test Start Time: 10:06 AM Initial Reading(RI): [4.9193" .9196" Test End Time: 0:21 AM Final Reading(RF): Test Duration: 5 MIN Change in Reading(RF-RI): -0.0003" Pass/Fail Threshold or Criteria: +/-0.002" +/_0.002" +/_0.002" +/_0.002" Test Result: ®Pass ❑Fail ❑Pass ❑Fail ❑Pass ❑Fail Pass ❑fail Was sensor removed for testing? ®Yes [:]No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No [--INA ❑Yes ❑No ❑NA Was sensor properly replaced and ®Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No [:INA verified functional after testins? Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) ABOVE IS THE LAST OF TWO BACK TO BACK 15 MINUTE TESTS 1 If the entire depth of the sump is not tested,specify how much was tested. If the answer to gmny of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)