COMPLIANCE INFO_2002-2009 - Laserfiche WebLink

Home Browse Search

npr 28 05 01:20p Came Brown [2091461-6342 p.3 Spill Containment - OPW EVR Thread -on or OPW/POMECO EVR Multi -Port Spill Containers are certified for installation on the OPW Phase t EVR system. All fill ports in these spill containers feature enhanced 1 DK-2100-EVR vapor tight drain valves that exceed the EVR requirements for a maximum vapor leak rate of 0.17CFH at 2.0 inches H2O. The vapor return spill containers feature a permanent plug installed in the drain ports, as per EVR requirements. Overfill Prevention -The OPW 61 SO-4000-EVR Series Overfill Prevention Valves are certified for installation on the OPW Phase 1 EVR system. The vapor tight EVR 61 SO's are designed to provide positive shut-off of product delivery, before an overfill condition occurs, per EPA requirements, without intervention from the transport driver. The valve features a sealed float pivot and a threaded lower tube connection, and exceeds the EVR requirement for a maximum vapor leak rate of 0A7CFH at 2.0 inches H2O. The 6150-EVR Series Valve is installed in the base of the OPW EVR Spill Container with the patent pending 611SK lack Screw device. This configuration allows liquid in the spill container to be drained directly into the drop tube, thereby isolating the drain valve from the tank ullage, eliminating a notorious leak point in previous systems. 'tank Bottom Protector - The OPW/POMECO 6111-1400 Tank Bottom Protector is EVR certified for installation at the bottom of the overfill Prevention valve drop tube to help prevent the underground storage tank from sustaining damage from erosion or tank gauging sticks. Ball Float and 233 Extractor - The OPW 53VML Ball Float, 233 Extractor and ;i, K'a 61T Fill Drop Tube configuration can be installed as an alternative to the 6150 Overfill application. The installation of the Ball Float/Drop Tube system is identical to the 61 SO Overfill Valve on the OPW Phase 1 Vapor Recovery System. ; Rotatable Swivel Ad ti (Fill and Vapor) - OPW EVR Rotatable Swivel Adaptors are certified for installation on the fill and vapor ports on the OPW Phase 1 EVR system. OPW Swivel Adaptors provide 360 degrees of rotation of any product or vapor recovery elbow to prevent the adaptors from loosening on the spill container risers. OPW Swnrel Adaptors exceed the EVR requirement to maintain a minimum 360. degree rotation with an average static torque not to exceed 108 inch - pounds O foot pounds). The enhanced poppet system on the OPW 61 VSA-EVR vapor swivel adaptor provides a vapor: tight seal when closed, per EVR requirements. ;:Adaptor Tool "An OPW 61 SA -TOOL is required to ensure proper installation of OPW Rotatable Swivel Adaptors; spill containers and threaded riser adaptors, per EVR requirements. The 61:SA-TOO L includes provisions for the use of a torque wrench to facilitate accurate installation andtesting Dust Caps (Fill & Vapor) - OPW EVR Dust Caps are certified for installation on OPW EVR Certified Rotatable Adaptors. OPW EVR Certified Dust Caps feature enhancedribbed, seals and increased sealing forces to provide a bubble -tight seal, per EVR requirements. Available in Duratuff or low -profile metal models. s: readed Riser Adaptor.(Face Seal Adaptor) -An OPW FSA -400 Threaded Riser Face Seal gdaptor is required to provide. a flat; true sealing surface on threaded pipes where a gasket seal eacrsts per EVR requirements The FSA -400 is installed on the fill pipe riser below the spill ` coMiner,to, provide"a true sealing surface for the drop tube flange on the 61 SO-40OC-EVR OverfillPrevention Valves. Th 'e is also required on tank gauging risers, though is 901094- 9h vapor resersand rotatable adaptors. Pressure Vacuum Vent - The OPW 623V Pressure Vacuum Vent is certified for installation on the O?W..Phase 1 EVR system The 623V's are installed on the top of the vent pipes for underground (ties s orage tanks. The vent.cap and internal wire screen are designed to protect the tank vent _- }tiles against intrusion arid -;blockage from water, debris or insects. A normally closed poppet in Elie valveoperrs, ax a predetermined pressure or vacuum setting to allow the tank to vent The &23V exceeds tfe;EVR.requirement of a maximum vapor leak rate of 0.17CFH at 2.0 inches H2O.