COMPLIANCE INFO_1995 - Laserfiche WebLink

Home Browse Search

JLD CONSIDER I ':"FITS OF O'ERGLASS PIPING No H RED THREAD 11 double-wall secondary containment piping helps installers meet EPA regulations and protect the environment High Flow Capacity RED THREAD 11 pipe has a greater flow capacity than many other pipes with the same O.D. This is because its high-strength, fiberglass construction provides a smoother I.D. and can pro- vide a larger 1. D. for specified pressures. Thermal Conductivity The thermal conductivity of RED THREAD 11 pipe is only a fraction of that of steel. Unear Expansion The coefficient of expansion of RED THREAD 11 pipe is 1/5 to 1/8 that of thermo- plastic pipe and only twice that of steel. Adhesives Designed specifically for the RED THREAD 11 piping system, the adhe- sives required for joining product and containment piping are Smith Fiber- glass Products DS -7000 series adhesives. Testing of the adhesive systems shows that they are compatible for use When the termination concentric reducer with a tap is installed in the sump, the complete system will be pressure testable. with all concentrations of ethanol and methanol, including 100%. Adhesive kits contain epoxy resin and hardener in separate containers, joint cleaner, mixing stick, paint brush, and paper towels. A detailed instruction sheet is also included with each kit. Refer to approp- riate installation bulletin for additional information including cure cycle times. Following these instructions will insure fast and easy assembly of RED THREAD 11 piping systems. Tapering When RED THREAD 11 pipe is cut to length on the job site, the cut end must be retapered. A field tapering tool avail- able from Smith Fiberglass Products is used for this purpose. The tool quickly applies the proper taper by a shaving operation — similar to a pencil shar- pener. Plain unthreaded field -made tapers can be joined with factory - installed threaded T.A.B. Joint coupled ends. Either factory -made T.A.B. spigots or field -made tapers may be joined with belled fittings. For proper tapering, carefully follow the operating instruc- tions (bulletin 9106) included with the tapering tool kit. For detailed installation instructions covering assembly, burial, testing and repair, refer to Smith Fiberglass Products bulletin 1055 for product piping and bulletin 1190 for containment piping. Handling and Storage RED THREAD 11 pipe is packaged in compact bundles of four to eight lengths. Bundles of RED THREAD 11 pipe can be safely stored on level ground or on racks with 10 -foot (or less) support spacing. Reasonable care must be used in handling RED THREAD 11 pipe. Do not drop or throw RED THREAD 11 pipe on the ground or drop rocks or other heavy objects on it. Follow the proper procedures for inspecting piping materials as stated in Smith Fiberglass Products installation bulletin 1055. For industry reference, see API Publication 1615/87 "Installation of Underground Petroleum Storage Sys- tems,"and PEI/RP 100-87 "Recommended Practices for Installation of Underground Liquid Storage Systems."