COMPLIANCE INFO_1995 - Laserfiche WebLink

Home Browse Search

IS19. Secondary container other t — double-walled tanks (includes interception and detection systems). [Section 2633 (f)] A. Backfill in secondary container. ESection 2635 (c) 1-81 B. Pore space of granular material used as backfill for primary containers) complies with Section 2631 (9). EEngineering data to support capacity requirement]. C. Two or more primary containers within secondary container. (include information an product compatibility) D. Secondary container capable of precluding highest anticipated groundwater. E. Secondary container sloped to a monitoring sump from which leakage or precipitation can be detected and removed. ® F. Water tight corner which extends at least a foot beyond each boundary of the secondary container excavation, sloped to drain away from excavation. 20. Secondary container(s) thickness, density, composition, product compatibility. Sized to contain unauthorized releases from primary containers to allow sufficient time for detection and removal. [Section 2631 (c)] 21. Secondary container(s) volumetric requirements: [Section 2631 (e) (1) and (2)] ® A. Single primary containers = 100%. B. Multiple primary containers = 150% of largest primary container or 10% above aggregate. 22. Secondary container(s) open to rainfall. E Section 2631 Ml Volumetric requirements = 24 hours of 100 year storm in addition to primary container volumes. IIIZ 23. 1114 Secondary container floor. [Section 2631 (i)] A. Constructed an firm base. e. Sloped to collection sump ( 1/8 inch per foot). (1) One or more access casings installed in sump. ® (a) Size to allow removal of collected liquid. (b) Extended to ground surface. (c) Covered with a locked waterproof cap or within a secured facility. (d) Thickness allows for anticipated stresses. (e) Construction materials are not weakened stored product or will not donate, capture, or mask constituents to be monitored. 24. ^ Membrane liner specifications. [Section 2631; k, 1, and m] 6