Laserfiche WebLink
SITE HEALTH A SAFETY PLAN <br />8.0 DECONTAMINATION PROCEDURES <br />A. INTRODUCTION <br />As part of the system to prevent or reduce the physical <br />transfer of contaminants by people and/or equipment from <br />on-site, procedures will be instituted for the proper <br />decontamination of anything leaving the Exclusion Area <br />and contamination Reduction Area. These procedures <br />include the decontamination of personnel, protective <br />equipment, monitoring equipment, clean-up equipment, <br />etc. Unless otherwise demonstrated, everything leaving <br />the Exclusion Area should be considered contaminated and <br />appropriate methods established for decontamination <br />shall be followed. In general, decontamination at the <br />site consists of rinsing of equipment, personnel, etc., <br />with some amounts of water and washing with detergent <br />water solutions. <br />B. PROCEDURE <br />1. Personnel equipment worn into the Exclusion Area <br />will be decontaminated upon leaving the <br />Contamination Reduction Area. All equipment <br />decontaminated will be air dried. <br />2. The decontamination of equipment, material, and <br />personnel used or working in the Contamination <br />Reduction Area may be somewhat less complex than <br />that used in the Exclusion Area. <br />3. The spent solution, brushes, sponges, containers, <br />stands, etc., used in the decontamination process <br />must, until shown otherwise, be considered <br />contaminated and must be properly disposed. <br />11 <br />