COMPLIANCE INFO_1999-2005 - Laserfiche WebLink

Home Browse Search

Underground Storage Tank Monitorintian-Page 2 C. Pipeline Monitoring Line monitoring is performed using the following methods: (Check all which apply) Continuous electronic monitoring of piping sump(s)/trench and other secondary containment low points. Leak Sensor Manufacturer: Veeder Root Model No.: 208 Will a piping leak alarm trigger automatic shutdown of the pump(i.e. turbine)? 0 Yes; E]No. Will failure/disconnection of monitoring system trigger automatic shutdown of pump? E] Yes; Z No. Mechanical line leak detector(MLLD) that routinely performs 3.0 g.p.h. leak tests and restricts or shuts off product flow when a leak is detected. MLLD Manufacturer: Red Jacket Model No.: FXIV ❑ Electronic line leak detector(ELLD)that routinely perform 3.0 g.p.h. leak tests. ELLD Manufacturer: Model No.: Programmed line tightness tests: El Minimum Monthly 0.2 g.p.h.; [] Minimum Annual 0.1 g.p.h. Will ELLD detection of a piping leak trigger automatic shutdown of the pump? F1 Yes; E] No. Will failure or disconnection of the ELLD trigger automatic shutdown of the pump? El Yes; [—]No. Line tightness testing conducted: E Annually; [] Every 3 years; El Other (specify): Ej No product or remote-fill piping is connected to the UST(s). [] Piping is suction piping meeting all requirements for exemption from monitoring. [See 23 CCR§2636(a)(3)] E] Other (specify): D. Dispenser Leak Detection: (Check all which apply) No dispensers in system Float and chain assembly in under-dispenser containment trips shear valve in case of leak. Assembly Manufacturer: Bravo Model No.: ❑ Continuous electronic monitoring of under-dispenser containment. Leak Sensor Manufacturer: Model No.: Will a leak trigger audible and visual alarms? R Yes, El No. Will a leak alarm trigger automatic shutdown of the pump? El Yes;E] No. Will fidlure/disconnection of monitoring system trigger automatic shutdown of pump? El Yes; R No. Dispenser housings are opened and fittings inside are visually inspected daffy for leaks (required if under- dispenser containment is not installed). E] Other(specify): E. Monitoring Locations Included with this monitoring plan is a Site Plan which shows the general tank and piping layouts and the locations where monitoring is performed(Le. locations of sensors, fine 1eak detectors, control panels, etc.).