Laserfiche WebLink
• • <br /> San Joaquin County DIRECTOR <br /> Donna Heran, REHS <br /> •.c Environmental Health Department ASSISTANT DIRECTOR <br /> 2. 600 East Main Street Laurie Cotulla,REHS <br /> Q: <br /> Stockton, California 95202-3029 PROGRAM COORDINATORS <br /> .'. Carl Borgman,REHS <br /> Website: www.s or 1ehd Mike Huggins, REHS, RDI <br /> �gov. g Margaret Lagorio, REHS <br /> Phone: (209)468-3420 Robert McClellon, REHS <br /> Fax: (209) 464-0138 .teff Carruesco,REHS, RDI <br /> Kasey Foley,REHS <br /> May 7, 2008 <br /> Nikki Middleton <br /> BZ Service Station Maintenance <br /> Fax: 916-371-2540 <br /> RE: 1225 W Lockeford Street, Lodi(SR0054159) <br /> The San Joaquin County Environmental Health Department(EHD)has completed the <br /> review of the application for permit(SR0054159)to install an OPW 1 C-2100-DEVR <br /> direct burial spill bucket on the diesel fill riser and an OPW IDK-2100-EVR drain valve <br /> kit on the 91 product fill spill bucket at the above noted address. <br /> The permit also includes two parts installed on 11-20-07. Installation and testing of these <br /> parts were witnessed by an EHD inspector at that time. The parts were a FE Petro 91 <br /> product turbine relay and a VMI 99 LD2000 line leak detector. The permit has been <br /> approved with the following conditions: <br /> 1. Contact the local fire department and the San Joaquin Valley Air Pollution <br /> Control District for any applicable permits and requirements. <br /> 2. Qualified service technicians must possess or work under the direct and personal <br /> supervision of an individual physically present at the work site who possesses all <br /> of the following: <br /> a. One of several permissible valid, current contractor's licenses issued by <br /> the Contractors State License Board(may be issued to the installation <br /> company), and <br /> b. A valid, current California UST Service Technician certificate issued by <br /> the International Code Council (ICC), and <br /> c. A valid, current certificate of training from the manufacturer(s) of the <br /> component(s) being tested, repaired, or serviced, and <br /> d. Each person installing or testing any component must hold a certificate of <br /> training from the manufacturer of that component. <br /> 3. Permit expires 90 days from date of approval. Note: If an extension to the <br /> expiration date is required, a written request must be submitted to this office prior <br /> to the expiration date. <br /> 4. All components must be certified by an independent testing organization and <br /> labeled as required by the organization. (UL, ULC, ANSI, API, ASTM, etc. See <br /> Page 1 of 2 <br />