COMPLIANCE INFO_2009-2015 - Laserfiche WebLink

Home Browse Search

Appendix VI MONITORING SYSTEM CERTIFICATION For Use By All Jurisdictions Within the State of California Authority Cited: Chapter 6.7, Health and Safety Code; Chapter 16, Division 3, Title 23, California Code of Regulations This form must be used to document testing and servicing of monitoring equipment. A separate certification or report must be prepared for each monitoring system control panel by the technician who performs the work. A copy of this form must be provided to the tank system owner/operator. The owner/operator must submit a copy of this form to the local agency regulating UST systems within 30 days of test date. A. General information Facility N.—LODI FOOD & LIQUOR Bldg. No.: Site Address 1225 W LOCKFORD ST City: LODI CA Zip: Facility Contact Person- PAUL Contact Phone No.: ( ) Make/Model of Monitoring System: INCON Date of Testing/Servicing: 11/29/2011 B. Inventory of Equipment Tested/Certified Check the appropirlate boxes to indicate s ecifle a ui ment ins ectad/serviced: Tank ID: 87 Tank ID: 91 ® In -Tank Gauging Probe. Model: MAG ® In -Tank Gauging Probe. Model: MAG ® Annular Space or Vault Sensor. Model: EIS ❑ Annular Space or Vault Sensor, Model: SPLIT W DSL ® Piping Sump / Trench Sensor(s). Model: ULS ® Piping Sump / Trench Sensor(s), Model: ULS ❑ Fill Sump Sensor(s). Model: ❑ Fill Sump Sensor(s). Model: ® Mechanical Line Leak Detector. Model: 99LD 2000 ® Mechanical Line Leak Detector. Model: 99LD 2000 ❑ Electronic Line Leak Detector. Model: ❑ Electronic Line Leak Detector. Model: ❑ Tank Overfill / High -Level Sensor. Model: ❑ Tank Overfill / High -Level Sensor. Model: ❑ Other (specify equipment type and model in Section E on Page 2). ❑ Other (specify equipment type and model in Section E on Page 2). Tank ID: DSL Tank ID: NA ® In -Tank Gauging Probe. Model: MAG ❑ In -Tank Gauging Probe. Model: ® Annular Space or Vault Sensor. Model: EIS ❑ Annular Space or Vault Sensor. Model: ® Piping Sump / Trench Sensor(s). Model: ULS ❑ Piping Sump / Trench Sensor(s). Model: ❑ Fill Sump Sensor(s). Model: ❑ Fill Sump Sensor(s). Model: ® Mechanical Line Leak Detector. Model: 99LD 2000 ❑ Mechanical Line Leak Detector. Model: ❑ Electronic Line Leak Detector. Model: ❑ Electronic Line Leak Detector. Model: ❑ Tank Overfill / High -Level Sensor. Model: ❑ Tank Overfill / High -Level Sensor. Model: ❑ Other (specify equipment type and model in Section E on Page 2). ❑ Other (specify equipment type and model in Section E on Page 2). Dispenser ID: 1-2 Dispenser ID: 5-6 ® Dispenser Containment Sensor(s). Model: ULS ® Dispenser Containment Sensor(s). Model: ULS ® Shear Valve(s). ® Shear Valve(s). ❑ Dispenser Containment Float(s) and Chain(s). ❑ Dispenser Containment Float(s) and Chain(s). Dispenser ID: 3-4 Dispenser ID: 7-8 ® Dispenser Containment Sensor(s). Model: ULS ® Dispenser Containment Sensor(s). Model: ULS ® Shear Valve(s). ® Shear Valve(s). ❑ Dispenser Containment Float(s) and Chain(s). ❑ Dispenser Containment Float(s) and Chain(s). Dispenser ID: Dispenser ID: ❑ Dispenser Containment ❑ Dispenser Containment Sensor(s). Model: Sensor(s). Model: ❑ Shear Valve(s). ❑ Shear Valve(s). ❑ Dispenser Containment Float(s) and Chain(s). ❑ Dispenser Containment Float(s) and Chain(s). *If the facility contains more tanks or dispensers, copy this form. Include information for every tank and dispenser at the facility. C. Certification - I certify that the equipment identified in this document was Inspected/serviced in accordance with the manufacturers' guidelines. Attached to this Certification is information (e.g. manufacturers' checklists) necessary to verify that this information is correct and a Plot Plan showing the layout of monitoring equipment. For any equipment capable of generating such reports, I have also attached a copy of the report; (check a// that apply): ❑ System set-up ❑ Alarm history report Technician Name (print): DAVE WINKLER Signature: _-,13 Certification No.: 5263373 -UT License No: 08-1739 Testing Company Name: AFFORDA-TEST Phone No. (209) 744-0113 Testing Company Address: 416 2 STREET GALT, CA 95632 Date of Testing/Servicing: 11-29-2011 Monitoring System Certification Page 1 of 4 2/21/07