COMPLIANCE INFO_2002-2006 - Laserfiche WebLink

Home Browse Search

- a 3. Piping Leak Detection Monitoring Equipment Monitoring Method Manufacturer Model Monitoring Frequency Sump leak sensors connected to Veeder Root 794380-208 continuous monitoring system Specify type: Continuous ❑ Discriminating ® Non-discriminating ❑Mechanical line leak detectors with programmed leak threshold of three gallons per hour ® Electronic line leak detectors with Veeder Root PLLD 848480-001 programmed leak threshold of: Every pumping cycle ❑0.1 gph ❑0.2 gph 03 Qph Line integrity testing by: ❑ Electronic line leak detector is equipped to conduct line tightness ❑Annually testing ❑Other: ❑Third party testing ® Not required ❑ Other(Specify): 4. Dispenser Leak Detection Monitorin Equipment Monitoring Method Manufacturer Model Monitoring Frequency Mechanical float in dispenser containment Electronic leak sensor in dispenser Veeder Root 794380-208 containment: El Discriminating Continuous ® Non-discriminating ❑Visual inspection ❑ Daily F-1 Other: No under-dispenser containment ❑Other(specify): 5. Positive Shutdown Capabilities ❑System does not have positive shutdown capabilities El Individual dispenser shutdown will occur whenever release is sensed in under-dispenser containment Automatic pump shut off will occur whenever: ® Release is sensed in turbine sump ® Release is sensed in primary piping ® Release is sensed at dispenser ®Monitoring system is disconnected or fails in any way(fail safe) ❑Other(specify): 6.Secondary Containment Testing ❑Secondary containment is not tested ® In the State of California,secondary containment systems installed on or after January 1,2001,shall be tested upon installation, six months after installation,and every 36 months thereafter. Secondary containment systems installed prior to January 1,2001, shall be tested by January 1,2003,and every 36 months thereafter. 7. Annual Equipment CertificatioNTestin ®Annually ❑ Other(specify): 2