Laserfiche WebLink
• .t <br />I( <br />1. <br />vt <br />Three complete sets of plans (include manufacturer's specification sheets for proposedui nt to be installed). <br />�i p� d). <br />2. <br />Plans drawn to scale in non -erasable print. <br />\°� ' <br />w _ <br />-0 <br />3. <br />Plot plan to show location of tanks and all associated piping. <br />COMPOSITION <br />, r� Q <br />I STQ - I <br />S 7e �e I <br />4. <br />MODEL <br />Striker plates or drop tube -mounted bottom protectors illustrated below all accessible openings. <br />PRODUCT <br />5. <br />�Su( tr �`` <br />Tank cross-sectional diagram. <br />CORROSION PROTECTION <br />,�� E y (a fS <br />6e v' /a S5 <br />6. <br />Detail of tank, associated piping, excavation and cover. <br />U.L. LISTED <br />7. <br />%' S <br />Tank(s) and piping approved by a nationally recognized independent testing organization. [Title 23, <br />Chapter 16, <br />COMPATIBILITY WITH 100% <br />METHANOL <br />Article 3, Section 2631 (b) & 26351 <br />Y 5 <br />8. <br />Verification of product compatibility with the tank(s), piping, monitoring <br />device(s), epoxy or silicone glues, etc. <br />9. <br />Manufacturer's written installation instructions for tank(s), piping, monitoring devices, etc. <br />10. <br />At the installation site, prior to installation, a tightness test shall be performed on both primary <br />(10) and <br />secondary (20) containment systems before covering. (Section 2635 (a) (3) & (4)] <br />11. <br />Tank integrity test required upon completion of installation with tank in operating condition. Test <br />results to be <br />submitted directly to PHS-EHD from the testing company or owner of facility. [Health & Safety Code, <br />Division 20, <br />Chapter 6.7, Section 25291 (h)] <br />12. <br />TANK COMPOSITION <br />TANK <br />I( <br />CAPACITY <br />7,0 UI 0 <br />wa�0 <br />(9 o 6 <br />MANUFACTURER <br />w _ <br />-0 <br />COMPOSITION <br />, r� Q <br />I STQ - I <br />S 7e �e I <br />MODEL <br />PRODUCT <br />(%JJ'� , <br />�Su( tr �`` <br />CORROSION PROTECTION <br />,�� E y (a fS <br />6e v' /a S5 <br />U.L. LISTED <br />C 5 <br />%' S <br />�'e S <br />COMPATIBILITY WITH 100% <br />METHANOL <br />IJ S <br />J <br />Y 5 <br />13. TANK(s) TO BE INSTALLED <br />A. Steel -clad with fiberglass reinforced plastic coatings, composites, or equivalent non-metallic exterior <br />coatings or coverings. <br />(1) Tested at the installation site using an electric resistance holiday detector. <br />(2) Vacuum applied to interstitial space. <br />B. Fiberglass <br />(1) Installation instructions require an air test and soap bubble test prior to installation. <br />(2) Vacuum applied to interstitial space. <br />(3) Hydrostatic annular (primary tank pressure test). <br />C. Non -clad steel tank [Section 2635 (a) (2) (A)] <br />(1) Cathodic protection provided for entire tank, piping and components (nuts, bolts, washers <br />etc.). <br />(2) Field installed cathodic protection systems designed and certified as adequate by a <br />corrosion specialist. <br />(3) Impressed current systems to be inspected no less than every 60 days. <br />J <br />