Laserfiche WebLink
Introduction <br />Important ow To protect yourself and your equipment, observe the following warnings and <br />important information. <br />The Veeder-Root Interstitial Liquid Sensor for use in Steel Tanks detects the presence <br />of liquid in the interstitial space of a double-wall steel tank. Liquid in the annulus could <br />mean a dangerous leak. When liquid is detected, the sensor sends an alarm signal to a <br />TLS -350R, TLS -350, ILS -350, TLS -300i, TLS -300C, TLS -2501, or ILS -250 <br />monitoring systems. The monitor's visual and audible built-in alarm indicators <br />immediately tell you where the problem is, so you can quickly take action to help <br />prevent serious safety and environmental problems. The Veeder-Root Interstitial Liquid <br />Sensor for Steel Tanks can be used in the annulus of steel tank with a sensor riser pipe <br />of 1.5" I.D. or greater. Only two wires are required to connect the sensor to a TLS or <br />ILS system. <br />This product is to be installed and operated in the highly combustible <br />environment of a gasoline storage tank where flammable liquids and <br />explosive vapors may be present. <br />Improper installation may result in fire or explosion causing serious <br />injury or death. <br />Leaking underground tanks can create serious environmental and <br />health hazards. It is your responsibility to install this product in <br />accordance with the instructions and warnings found in this manual. <br />Carefully read the installation instructions and warnings found in this <br />manual. Failure to do so could result in undetected potential <br />environmental and health hazards. <br />Failure to install this product in accordance with its instructions and <br />warnings will result in voiding of all warranties connected with this <br />product. <br />The Veeder-Root Interstitial Liquid Sensor for use in Steel Tanks detects the presence <br />of liquid in the interstitial space of a double-wall steel tank. Liquid in the annulus could <br />mean a dangerous leak. When liquid is detected, the sensor sends an alarm signal to a <br />TLS -350R, TLS -350, ILS -350, TLS -300i, TLS -300C, TLS -2501, or ILS -250 <br />monitoring systems. The monitor's visual and audible built-in alarm indicators <br />immediately tell you where the problem is, so you can quickly take action to help <br />prevent serious safety and environmental problems. The Veeder-Root Interstitial Liquid <br />Sensor for Steel Tanks can be used in the annulus of steel tank with a sensor riser pipe <br />of 1.5" I.D. or greater. Only two wires are required to connect the sensor to a TLS or <br />ILS system. <br />