Laserfiche WebLink
11111111H <br />/►> ° t,,. <br />(1) All values except pressure -temperature maximum (2) All sizes can accept full vacuum pressures at (3) UL Listed 5" secondary containment piping and <br />rating are nominal values. Tolerances or maximum/ maximum temperature ratings. Non -UL Listed 6" secondary containment piping are <br />minimum limits can be obtained from Smith also available from Smith Fiberglass Products Inc. <br />Fiberglass Products Inc. <br />e P <br />511111 cal-liftuamW ®1U <br />Nominal <br />Pipe Size <br />pncnesl <br />2" & 3" <br />4.. <br />r <br />=Nominalominal <br />psi @ 75' F <br />Nominal <br />Nominal Nominal <br />ill Test External Pressurepandom <br />psi @ 75' F psi fa 150` F <br />O.D. <br />I.D. <br />all Thickness Weight <br />Pressure -Temp. Pressure Max. Rating (psig/MPa) Lengths <br />n./ ) <br />(in./ ) <br />(in./ ) (lbs.-tt./ ) <br />Max. Rating (Psi9) 751F/ 150"F/ (ft./ ) <br />2 <br />2.375 <br />2.235 <br />0.070 <br />0.4 <br />250 psig @ 150' F 375 <br />88 <br />79 15 <br />30 <br />3 <br />3.500 <br />3.360 <br />0.070 <br />0.6 <br />175 psig @ 150' F 265 <br />29 <br />24 15 <br />30 <br />4 <br />4.500 <br />4.360 <br />0.070 <br />0.8 <br />125 psig @ 150 F 265 <br />34 <br />30 ff3O <br />(1) All values except pressure -temperature maximum (2) All sizes can accept full vacuum pressures at (3) UL Listed 5" secondary containment piping and <br />rating are nominal values. Tolerances or maximum/ maximum temperature ratings. Non -UL Listed 6" secondary containment piping are <br />minimum limits can be obtained from Smith also available from Smith Fiberglass Products Inc. <br />Fiberglass Products Inc. <br />e P <br />511111 cal-liftuamW ®1U <br />Nominal <br />Pipe Size <br />pncnesl <br />2" & 3" <br />4.. <br />PROPERTY RED THREAD15 IIA Pipe <br />RED THREADO IIA Pipe <br />psi @ 75' F <br />psi a 150' F <br />psi @ 75' F psi fa 150` F <br />Axial Tensile (ASTM 02105) <br />Ultimate Stress <br />13.200 <br />11.600 <br />14,800 <br />12,100 <br />Design Stress <br />3.300 <br />2.900 <br />3.700 <br />3,025 <br />Modulus of Elasticity <br />2.08 x 106 <br />1.95 x 106 <br />2.37 x 106 <br />1.52 x 106 <br />Axial Compression (ASTM 0695) <br />Ultimate Stress <br />18.760 <br />14.280 <br />33.300 <br />25.600 <br />Design Stress <br />4,690 <br />3,570 <br />8.300 <br />6.400 <br />Modulus of Elasticity <br />NA <br />NA <br />1.26 x 106 <br />.89 x 106 <br />Beam Bending (SFPTM) <br />Ultimate Stress <br />18.880 <br />17,290 <br />23.000 <br />NA <br />Design Stress•5i <br />2.360 <br />2.160 <br />2.900 <br />1,800 <br />Modulus of Elasticity <br />1.70 x 108 <br />1.20 x 106 <br />2.18 x 108 <br />1.79 x 106 <br />(Long Term per ASTM D2925) <br />Hydrostatic Burst (ASTM 01599) <br />Ultimate Hoop <br />29.860 <br />60.340 <br />35.000 <br />41,000 <br />Tensile Stress <br />Hydrostatic Design (ASTM 02992) <br />Procedure A <br />Cyclic 150 x 106 <br />NA <br />6.470161 <br />10.450 <br />Cycles <br />Coefficient of Linear <br />Thermal Expansion (SFPTM) <br />1.12 x 10-5 in./in./ F <br />0.88 x 10-5 in./in./ F <br />Specific Gravity <br />1.8 <br />1.8 <br />Flow Factor <br />Hazen -Williams Coefficient <br />150 <br />150 <br />(4) Ultimate and allowable design stresses <br />are based on minimum reinforced wall <br />thickness. Pipe is manufactured in <br />compliance with ASTM 02996. <br />(5) Design bending stress is 1/8 of <br />ultimate to account for combined <br />stress (i.e. benaing and pressure!. <br />Bending Radius, Minimum <br />Nominal <br />Pipe Size <br />pncnesl <br />2" <br />3" 4" <br />Ft. <br />75 <br />105 I 140 <br />Copyright 1992 Smith Fiberglass Products Inc. <br />and " traaemarKs of Smith Fiberglass Products Inc. <br />PRINTED IN U.S.A. <br />10M 1092 <br />(6) Design stress is based on long term <br />cyclic fatigue data using ASTM 02992 <br />test method. However, all testing is not <br />complete at time of printing. <br />(7) For 4" RED THREAD • IIA Dice the <br />hydrostatic cyclic design stress was <br />determines at 150' and 200 F. per ASTM <br />02992 Procedure A. Bases on this cata. <br />the extraootatea value at 75 F is 13.0»0 <br />psi. <br />It is the policy of Smith Fbe�glass Products to improve its products continually. In <br />accordance with that policy, the right is reserved to make changes in specifications. <br />descriptions and illustrative material contained in this bulletin as conditions tvarrant. <br />The intormation contained herein is general in nature and is not intended to express <br />any warranty of any type whatsoever nor shall any be implied. <br />®TH <br />S an I � OOCTS 114C. <br />FIBERGLASS PRON <br />A SUBSIOIARY OF A 0. SMITH CORPORATION <br />2700 West 65th Street a Little Rock, Arkansas 72209 e Telephone (501) 568-4010 . TWX(910)722-7377 9 FAX(501)568-4465 <br />