Laserfiche WebLink
C <br />FX1V Part No. 116-056-5, FX2V Part No. 116-057-5 <br />Fx1 DV Part No. 116-058-5, FX2DV Part No. 116-059-5 <br />Safety Precautions <br />The following defined terms are used throughout this literature to bring attention to the presence of hazards of <br />various risk levels, or to important information concerning the life of the product. <br />MIZARUMMI <br />Indicates presence of a hazard <br />r <br />Indicates presence of a hazard which will or <br />which will cause severe personal <br />can cause minor personal injury, death or <br />injury, death or substantial property <br />substantial property damage if ignored. <br />damage if ignored. <br />• <br />Indicates presence of a hazard <br />• <br />Indicates special instructions on installations, <br />which can cause severe personal <br />operation, or maintenance which are <br />injury, death or substantial property <br />important but not related to personal injury <br />damage if ignored. <br />hazards. <br />Before installing leak detector, review the application section in leak detector manual <br />#5191 for limitations or restrictions on usage. 40 <br />This instruction sheet should be kept with the end user of the leak detector for reference. <br />When using 117-182 Big -Flo Diaphragm Valve, refer to installation instructions #042- <br />108-1 included with the valve. When using an FXV model leak detector with adapter <br />housing #036-072-5, refer to installation instructions #041-415-1 included with the <br />housing. FXV Leak Detectors are for use with all UL -listed 4 -inch Red Jacket models <br />containing a "P" or "AG" prefix; FE Petro UL -listed 4 -inch "STP" models; Tokheim UL - <br />listed 4 -inch models — 585A-34 and 585A-150. <br />Tampering with the screws or seals on this leak detector may inhibit operation and will <br />void warranty. <br />This Red Jacket leak detector is to be installed into the two-inch threaded tapping on top of the Red Jacket <br />submersible pump. The FXDV models are specially designed for use with diesel fuel and should be used in <br />diesel applications to provide the appropriate operating characteristics. For proper installation, the following <br />steps should be followed in sequence. <br />