|
Icon FastFuse solvent is specifically designed for the split -bonding of Icon SplitRepair flexible compression
<br />seal fittings. The advantage of a SplitRepair fitting is that the pipe doesn't have to be disconnected to
<br />repair/replace a leaking fitting. FastFuse provides a permanent adhesive bond of the ProTex fitting
<br />material that makes the repair possible. As the most critical step in the SplitRepair installation process, it's
<br />important that FastFuse is applied properly (see notes below).
<br />HATURES
<br />BENEFITS
<br />_
<br />• Used with Icon SplitRepair fittings to eliminate disconnecting pipe i
<br />• Sufficiently bonded after a 1 -hour cure
<br />• Immediate testing after installation possible,
<br />• Unique blended solvent, specific to Icon ProTex material fittings
<br />4oz can with dauber applicator .�;.
<br />• Up to 6 -month shelf life
<br />Store can in a cool, dry place out of direct light. When stored as recommended
<br />in the original unopened container, FastFuse has a 6 -month or longer shelf life
<br />from package date. Condition material to 65° F to 75• F before using. FastFuse
<br />evaporates quickly, so to retain its properties, immediately replace lid after
<br />each application and store can on its lid.
<br />NOTE: When using solvents, be sure to extinguish all ignition sources and follow
<br />all typical safety regulations, including proper air ventilation. A Type A filter Is
<br />appropriate for FastFuse.
<br />ICON MAKES NO WARRANTIES EXPRESS OR IMPLIED, INCLUDING BUT NOT
<br />LIMITEDTO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
<br />A PARTICULAR PURPOSE. Given the variety of factors that can affect the use
<br />and performance of the product, some of which are uniquely within the user's
<br />knowledge and control, user is responsible for determining if FastFuse is
<br />suitable for a particular purpose and method of application. If the FastFuse
<br />purchased Is proved to be defective, THE EXCLUSIVE REMEDY, AT ICON'S
<br />OPTION, SHALL BE TO REFUND THE PURCHASE PRICE OF OR REPLACE THE
<br />ORIGINAL CARTRIDGE OF PRODUCT PURCHASED. Icon shall not otherwise be
<br />liable for loss or damages, direct, indirect, special, incidental, or consequential,
<br />regardless of any legal theory asserted, including but not limited to, contract,
<br />negligence, warranty, or strict liability.
<br />IAC FASTFUSE
<br />Icon FastFuse Split Fitting Bonding Solvent, 4oz Can $82
<br />IACFASTFUSE-CASE
<br />Icon FastFuse Split Fitting Bonding Solvent, 4oz Can, Case of 10 $770
<br />Properties
<br />General Instructions
<br />Color
<br />Clear
<br />FastFuse is the solvent that provides the permanent adhesion of split Icon
<br />Viscosity
<br />low, highly liquid
<br />fitting parts when applied properly as follows:
<br />Worktife (room temp)
<br />_ t-2 min
<br />Time to Full Cure
<br />1 hr
<br />1. Clean the split surface of the Icon fitting part with alcohol or acetone
<br />Application Temp (in sump)
<br />0• F to 120° F
<br />2. Quickly and liberally apply FastFuse to the split area
<br />Thermal Service Range
<br />-55° F to 230° F
<br />3. Immediately put the split part together and hold without movement for
<br />Elongation
<br />45%
<br />2-4 minutes
<br />Fuel Resistance
<br />Excellent
<br />4. Leave in place for a full hour before handling bonded partfor any
<br />remaining installation steps
<br />Store can in a cool, dry place out of direct light. When stored as recommended
<br />in the original unopened container, FastFuse has a 6 -month or longer shelf life
<br />from package date. Condition material to 65° F to 75• F before using. FastFuse
<br />evaporates quickly, so to retain its properties, immediately replace lid after
<br />each application and store can on its lid.
<br />NOTE: When using solvents, be sure to extinguish all ignition sources and follow
<br />all typical safety regulations, including proper air ventilation. A Type A filter Is
<br />appropriate for FastFuse.
<br />ICON MAKES NO WARRANTIES EXPRESS OR IMPLIED, INCLUDING BUT NOT
<br />LIMITEDTO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
<br />A PARTICULAR PURPOSE. Given the variety of factors that can affect the use
<br />and performance of the product, some of which are uniquely within the user's
<br />knowledge and control, user is responsible for determining if FastFuse is
<br />suitable for a particular purpose and method of application. If the FastFuse
<br />purchased Is proved to be defective, THE EXCLUSIVE REMEDY, AT ICON'S
<br />OPTION, SHALL BE TO REFUND THE PURCHASE PRICE OF OR REPLACE THE
<br />ORIGINAL CARTRIDGE OF PRODUCT PURCHASED. Icon shall not otherwise be
<br />liable for loss or damages, direct, indirect, special, incidental, or consequential,
<br />regardless of any legal theory asserted, including but not limited to, contract,
<br />negligence, warranty, or strict liability.
<br />
|