Laserfiche WebLink
11 <br />Nominal <br />Nominal <br />Nominal <br />Nominal Wall <br />Nominal <br />psi @ 75°F <br />Mill Test <br />External Pressure <br />Max. Rating (psig/MPa) <br />Random <br />Pipe Size") <br />I.D. <br />O.D. <br />Thickness <br />Weigght <br />Pressure Temp. <br />Pressure <br />22.9 <br />9653 <br />Lengths <br />(in.) <br />(in./mm) <br />(in./mm) <br />(in./mm) <br />(Ibs: ft./kg-m) <br />Max. Rating <br />(psig) <br />75°F/24°C 150°F/66'C <br />(ft <br />-/m) <br />1.26 x 10, <br />8687 <br />2.235 <br />2.375 <br />0.0'70 <br />0.4 <br />250 psig @ 150° F <br />375 <br />88 <br />79 <br />15 <br />25 <br />30 <br />2 <br />56.77 <br />60.33 <br />1.i1 <br />0.60 <br />1.72 MPa @ 66.5°C <br />2.59 <br />.61 <br />.54 <br />4.6 <br />7.6 <br />9.1 <br />3 <br />3.360 <br />3.500 <br />0.070 <br />0.6 <br />175 psig•Q 150° F <br />300 <br />29 <br />24 <br />15 <br />25 <br />30 <br />85.34 <br />88.90 <br />1.'S <br />0.89 <br />1.21 MPa @ 66.5°C <br />2.07 <br />.20 <br />.17 <br />4.6 <br />7.6 <br />9.1 <br />Cycles <br />4.360 <br />4.500 <br />0.0'0 <br />0.8 <br />125 psig @ 150° F <br />265 <br />34 <br />30 <br />15 <br />t}� 25 <br />30 <br />4 <br />110.74 <br />114.30 <br />-_ <br />1.19 <br />0.86 MPa @ 66.5°C <br />1.83 <br />.23 <br />.21 <br />4.6 <br />Bending Radius, Minimum <br />7TensPROPERTY 2, 3',4- RED THREAD® IIA Pipe <br />2" <br />475-TMPa <br />@ 24'C <br />psi @ 75°F <br />MPa @ 66.5`C <br />ileTM D21 05)psi <br />TM 02105) <br />Ultimate Stress <br />15,20: <br />104.8 <br />13,300 <br />91.7 <br />Design Stress <br />Modulus of Elasticity <br />3,80, <br />1.•SJ x '01 <br />26.2 <br />12411 <br />3,325 <br />1.4 x 101 <br />22.9 <br />9653 <br />Axial Compression (ASTM D695) <br />33,3Ni <br />230.0 <br />25,600 <br />177.0 <br />Ultimate Stress <br />S• 30.; <br />57.2 <br />6,400 <br />44.1 <br />Design Stress <br />1.26 x 10, <br />8687 <br />.89 x 10° <br />6136 <br />Modulus of Elasticity <br />Beam Bending (SFPTM) <br />23,00? <br />159.0 <br />NA <br />NA <br />Ultimate Stress <br />Design Stress's, <br />Modulus of Elasticity <br />700,1 <br />2.1 S x 10` <br />20.0 <br />15031 <br />1,800 <br />1.79 x 10° <br />12.4 <br />12342 <br />(Long Term per ASTM D2925) <br />Hydrostatic Burst (ASTM D1599) <br />Ultimate Hoop <br />35,000 <br />241.0 <br />41,000 <br />283.0 <br />Tensile Stress <br />Hydrostatic Design (ASTM D2992) <br />Procedure A <br />Cyclic ISO x 101 <br />10,450 <br />72.1 <br />Cycles <br />Coefficient of Linear <br />0.88 x 10•' in./in./°F <br />Thermal Expansion (SFPTM) <br />1.58 x 10'mmimm/`C <br />Specific Gravity <br />1.8 <br />Flow Factor <br />Hazen -Williams Coefficient <br />150 <br />Bending Radius, Minimum <br />Nominal <br />Pipe Size <br />inches <br />2" <br />3' <br />4" <br />Ft. <br />75 <br />105 <br />140 <br />m <br />22.9 <br />32.0 <br />-2.7 <br />(1) All values except pressure -temperature <br />maximum rating are nominal values. <br />Tolerances or maximum/minimum limit <br />can be obtained from Smith Fiberglass <br />Product Inc. <br />(2) All sizes can accept`full vacuum pressures at <br />maximum temperature ratings. <br />(3) UL Listed 5" secondary containment piping <br />and Non -UL Listed 6" secondary <br />containment piping are also available from <br />Smith Fiberglass Product Inc. <br />(4) Ultimate and allowable design stresses are <br />based on minimum reinforced wall <br />thickness. Pipe is manufactured in <br />compliance with ASTM D2996. <br />(5) Design accountorcombined stressstress is (i e.ultimate of <br />bend ng <br />and pressure). <br />(6) For RED THREAD' IIA pipe the hydrostatic <br />cyclic design stress was determined at 150° <br />and 200°F, Per ASTM D2992 Procedure A. <br />Based on this data, the extrapolated value at <br />75°F is 13,040 psi. <br />ji <br />It is the policy of Smith Fiberglass Products to improve its products continually. In accordance with that policy, the <br />right is reserved to make changes in specifications, descriptions and illustrative material contained in this manual as <br />conditions warrant. The information contained herein is general in nature and is not intended to express any <br />warranty of any type whatsoever nor shall any be implied. <br />PMEME®FR <br />9 ■ <br />lddollhL <br />A7777UL ISO 9001 <br />sMrrH RBIERGLAss PR®DUCTS INC. <br />Littke Rost, Arkansas <br />® / <br />A Subsidiary of A.O. Smith Corporation <br />2700 West 65th Street • Little Rock, Arkansas 72209-8592 • Telephone (501)568-4010 • FAX (501)568-4465 <br />®Copyright 1992 Smith Fiberglass Products Inc. PRINTED IN U.S.A. 15M1194 <br />0 and TM Trademarks of Smith Fiberqlass Products Inc . * . r •. <br />