COMPLIANCE INFO_1997-2006 - Laserfiche WebLink

Home Browse Search

E C7 MANUAL Another unique FE Pe feature. When nccessi during maintenance t, bleed line pressure to a vent screw is provide By turning this screw, line pressure is divert back to the tank. PRESSURE RELIEF: Reduces fuel discharge into the sump manhole or _ dispenser pan during servicing, further protecting service technicians and the environme:1t. WIRIMMUCAUM The IST uses FE Pecro's proven line check valve. At 2 3/4" in diameter, this valve reduces pressure loss at hic flow rates, - resul:ing in faster fueling times -anal lower power consumption. ,.The FE Petro check valve is proven to seal. You :cah avoid purchasing additional check valves when the IST is used with some electronic line 'leak detectors because of this proven reliability. SUPERIOR BEARING COOLING: The 1ST uses the excitusive FE Ppvro dooling system. This unique system continually passes over 1 GPM thro4i a fine bronze filter and directly through motor bearings whenever pump is openzing. This system has been designed to extend critical bearing and motor life. 11 PRESSURE RELIEF VALVE: The IST pressure relief valve• is thc sarric simple valve used for years in our standard submersibles. Factory set to relieve C, at or above pump pressure. This valve- is protected J,a from particles in the fuel by a fine mesh screen. `c By keeping static line pressure as high as possible, mechanical leak detectors make fewer tests, and therefore last longer. The IST uses the standard FE Petro air eliminator, which has a double funcdo:^. as the syphon primer for tank syphon systems. AIR ELIMINATOR: The air eliminator is a one way valve, allowing air to return to the tank, but not re-enter the -piping system. SYPHON CHECK VALVE: Optional for syp::oned tanks. Another time proven performer. 0 The FE Petro syphon check valve can be eapily cleaned in the field. It is not necessary to replace with a new valve if it becomes blocked from panicles in the Reel tanks.