Laserfiche WebLink
UST <br />SYSTEM PRINTSET INFORMATION <br /># # <br />CAPACITY St POP <br />1. <br />MANUFACTURER <br />r complea sets cf ;la -s (To include specification sheets and/or equipment brochures if not on file). <br />S <br />"V <br />2. <br />MODEL <br />Plans drawn to scale in -w,,-erasable print. <br />\-V— <br />3• <br />CORROSION PROTECTION Ptz-p, <br />Plot plan to show loution and number of tanks. <br />\ <br />4. <br />14 <br />Tank cross-sectional diagram included on prints submitted. <br />\S <br />5. <br />-L— <br />Detail of tank, piping system, excavation and cover. <br />6. <br />Tank(s) and piping apprrved by a nationally recognized independent testing organization. [Title 23, Subchapter 16, <br />Article 3, Sec. 2631 (r) & 26353 <br />\ <br />7. <br />v <br />Verification of product cawpatibility with the tank(s), piping, monitoring <br />device(s), epoxy or silim-4 glues, etc. [Section 2635 (b) (2)3 <br />8. <br />s <br />Manufacturer's written installation instructions for tank(s), piping, monitoring devices, etc. [Section 2635 (b) (5)3 <br />9. <br />Tightness Test (NFPA 3:) is required on both primary (10) and secondary (20) containment system aefore covering. <br />[Section 2635 (b) (6) & (7)3 <br />10. <br />�" <br />Double walled tanks using pressure or vacuum testing to monitor the annutar space. [Section 2635 (b) (7)3 <br />11. <br />NFPA 329 "Precision Test* required upon completion of installation with tank in _condition. Test results to <br />be submitted directly ;o FSS/EHD from the testing company or owner o ac ty. (Health &Safety Cave, Division 20, <br />Chapter 6.7, Section 2521;1 (03 <br />12. <br />TANK CnKPnRTTTrW <br />TANK # # # <br /># <br /># # <br />CAPACITY St POP <br />MANUFACTURER <br />COMPOSITION_R_.?_ <br />0404r: FZJE <br />MODEL <br />PRODUCT <br />CORROSION PROTECTION Ptz-p, <br />U.L. LISTED W_-52,A(31,t 1, <br />COMPATIBILITY WITH 100% UilLl <br />METHANOL <br />13. �KCs) TO BE INSTALLED <br />A. Steel -clad with fiberglass reinforced plastic. <br />N4 B. Holiday test required immediately before "setting" tank(s) (35,000 - 40,000 volts). [Section 2635 (b) (4)3 <br />C. Ierglass [Sections 2635 (3) and 2631 (p)3 <br />(1) Striker plate dimensions and materials. <br />(2) Striker plate under all accessible openings. <br />(3) Installation instructions require an air test and soap bubble test prior to instaltation. <br />D. Non -clad steel tank [Section 2635 (b)3 <br />— (1) cathodic protection provided for entire tank, piping and components (nuts, bolts, washers, <br />etc.). <br />_s (2) Approved by a corrosion engineer or N.A.C.E. technician. <br />(3) Document stating inspection method and frequency (mi nimunsemi -annual inspection requirement). <br />4 <br />