COMPLIANCE INFO_2004-2012 - Laserfiche WebLink

Home Browse Search

1 MONITORING SYSTEM CERTIFICATION For Use By All Jurisdictions Within the State of California Authority Cited.•Chapter 6.7,Health and Safety Code,Chapter 16,Division 3, Title 23, California Code of Regulations This form must be used to document testing and servicing of monitoring equipment. A separate certification or report must be prepared for each monitoring system control panel by the technician who performs the work. A copy of this form must be provided to the tank system owner/operator. The ownerloperator must submit a copy of this form to the local agency regulating UST systems within 30 days of test date. A. General Information Facility Name: VALERO Bldg.No.: Site Address: 1001 E.YOSEMITE City: MANTECA Zip: 95336 Facility Contact Person: BILLA Contact Phone No.: (209) 825-4569 Make/Model of Monitoring System: TLS 350 Date of Testing/Servicing: 1/20/2010 B. Inventory of Equipment Tested/Certified Check thea roriate boxes to indicates ific equipment ins cted/serviced: Tank ID: 87 Tank ID: 91 ®In-Tank Gauging Probe. Model: MAG-1 ®In-Tank Gauging Probe. Model: MAG-1 ®Annular Space or Vault Sensor. Model: 407 ®Annular Space or Vault Sensor. Model: 407 ®Piping Sump/Trench Sensor(s). Model: 208 ®Piping Sump/Trench Sensor(s). Model: 208 ❑Fill Sump Sensor(s). Model: ❑Fill Sump Sensor(s). Model: ®Mechanical Line Leak Detector. Model: LD2000 ®Mechanical Line Leak Detector. Model: LD2000 ❑Electronic Line Leak Detector. Model: ❑Electronic Line Leak Detector. Model: ❑Tank Overfill/High-Level Sensor. Model: ❑Tank Overfill/High-Level Sensor. Model: ❑Other(specify equipment type and model in Section E on Page 2). ❑Other(specify equipment type and model in Section E on Page 2). Tank ID: DSL Tank ID: ®In-Tank Gauging Probe. Model: MAG-1 ❑In-Tank Gauging Probe. Model: ®Annular Space or Vault Sensor. Model: 407 ❑Annular Space or Vault Sensor. Model: ®Piping Sump/Trench Sensor(s). Model: 208 ❑Piping Sump/Trench Sensor(s). Model: ❑Fill Sump Sensor(s). Model: ❑Fill Sump Sensor(s). Model: (9 Mechanical Line Leak Detector. Model: L02000 ❑Mechanical Line Leak Detector. Model: ❑Electronic Line Leak Detector. Model: ❑Electronic Line Leak Detector. Model: ❑Tank Overfill/High-Level Sensor. Model: ❑Tank Overfill/High-Level Sensor. Model: ❑Other(specify equipment type and model in Section E on Page 2). ❑Other(specify equipment type and model in Section E on Page 2). Dispenser ID: 1-2 Dispenser ID: 3-4 ❑Dispenser Containment Sensor(s). Model: ❑Dispenser Containment Sensor(s). Model: ®Shear Valve(s). ®Shear Valve(s). ®Dispenser Containment Float(s)and Chain(s). ®Dispenser Containment Float(s)and Chain(s). Dispenser ID: 5-6 Dispenser ID: 7-8 ❑Dispenser Containment Sensor(s). Model: ❑Dispenser Containment Sensor(s). Model: ®Shear Valve(s). ®Shear Valve(s). ®Dispenser Containment Float(s)and Chain(s). ®Dispenser Containment Float(s)and Chain(s). Dispenser ID: Dispenser ID: ❑Dispenser Containment Sensor(s). Model: ❑Dispenser Containment Sensor(s). Model: ❑Shear Valve(s). ❑Shear Valve(s). ❑Dispenser Containment Float(s)and Chain(s). ❑Dispenser Containment Float(s)and Chain(s). *If the facility contains more tanks or dispensers,copy this form. Include information for every tank and dispenser at the facility. C. Certification-I certify that the equipment identified in this document was inspected/serviced in accordance with the manufacturers' guidelines. Attached to this Certification is information (e.g. manufacturers' checklists) necessary to verify that this information is correct and a Plot Plan showing the layout of monitoring equipment. For any egni ment capable of generating such reports,I have also attached a copy of the report;(check all that apply): ❑System set-up X Alarm h!iqpry report Technician Name(print): HEATH MCEVER Signature: Certification No.: A27562 License.No.. 5236756-UT Testing Company Name: SST-SERVICE STATION TESTING Phone No.:(209) 465-5577 Testing Company Address: PO BOX 31465 STOCKTON CA 95213 Date of Testing/Servicing: 1/20/2010 Page 1 of 3 Rev(2/08)