COMPLIANCE INFO_2004-2012 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 • Page 3 of 6. PIPING SUMP TESTING Test Method Developed By: ❑ Sump Manufacturer &Industry Standard ❑Professional Engineer ❑Other(Spec) Test Method Used: ❑Pressure ❑Vacuum N Hydrostatic ❑Other(Spec) Test Equipment Used: INCON TS STS Equipment Resolution: .0001" Sump#87 Sump#91 Sump#DSL Sump# Sump Diameter: 42 42 42 Sump Depth: 40 40 40 Sump Material: FIBERGLASS FIBERGLASS FIBERGLASS Height from Tank Top to Top of 12" 12" 14" Highest Piping Penetration: Height from Tank Top to Lowest 12" 12" 16" Electrical Penetration: Condition of sump prior to testing: GOOD GOOD GOOD Portion of Sump Tested' 14" 14" 14" Does turbine shut down when sump sensor detects liquid(both ❑Yes ❑No If NA ❑Yes ❑No SNA ❑Yes ❑No .SNA ❑Yes ❑No ❑NA product and water)?` Turbine shutdown response time Is system programmed for fail-safe ❑Yes ❑No 4 NA ❑Yes ❑No ANA ❑Yes ❑No SNA ❑Yes ❑No ❑NA shutdown?* Was fail-sae verified to be ❑Yes El No RNA ❑Yes ❑No .SNA 11Yes ❑No .CRNA 11Yes ❑No ❑NA operational?* Wait time between applying pressure/vacuum/water and starting 5 MIN 5 MIN 5 MIN test: Test Start Time: 1320 1320 0951 Initial Reading(RI): 6.7555 1.0399 0.6517 Test End Time: 1335 1335 1006 Final Reading(RF): 6.7565 0.9597 0.6510 Test Duration: 15 MIN 15 MIN 15 MIN Change in Reading(RF-RI): 0.0010 0.0802 0.0007 Pass/Fail Threshold or Criteria: 0.002 0.002 0.01 Test Result: J' Pass ❑Fail ❑ Pass ,.Fail AB Pass ❑Fail ❑ Pass ❑Fail Was sensor removed for testing? VYes ❑No ❑NA 4 Yes ❑No ❑NA Yes ❑No ❑NA ❑Yes ❑No ❑NA Was sensor properly replaced and Yes ❑No ❑NA 9-Yes ❑No ❑NA RYes ❑No ❑NA ❑Yes ❑No ❑NA verified functional after testing? Comments— (include information on repairs made prior to testing, and recommended follow-up for failed tests) ' If the entire depth of the sump is not tested,specify how much was tested. If the answer to Any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)