COMPLIANCE INFO_2005-2008 - Laserfiche WebLink

Home Browse Search

F y Pb" FA om 1 IIIINWI► Spill Containment — DPW EVR Thread -on or OPW/POMECO EVR Multi -Port Spill Containers are certified for installation on the OPW Phase 1 EVR system; All fill ports in these spill containers feature enhanced 1 DK-2100-EVR vapor tight drain valves that exceed the EVR requirements for a maximum vapor leak rate of 0.17CFH at 2.0 inches H2O. The vapor return spill. containers feature a permanent plug installed in the drain ports, as per EVR requirements. Overfill Prevention The OPW 61 SO-40OC-EVR Series Overfill Prevention Valves are certified for installation on the OPW,Phase l EvR system.The,vapor,tight EVR 61 SO's are 6signed4b prbvide positive shut=off of product delivery,' before an overfill condition occurs, per EPA requirements,: without intervention from the transport driver. The valve features a sealed float pivot and a threaded lower tube connection, and exceeds the EVR requirement for a maximum vapor leak rate of,Q.17CFH at 2.0 inches H2O, The 61 SO-EVR Series Valve is installed in the base of the OPW EVR Spill Container with the patent pending 611SK lack Screw device. This configuration allows liquid -in the spill container to be drained directly into the drop tube, thereby isolating the drain valve from the tank ullage, eliminating a notorious leak point in previous systems. Tank Bottom Protector - The OPW/POMECO 6111-1400 Tank Bottom Protector is EVR certified for installation at the bottom of the overfillrevention valve drop tube to help prevent the underground storage tank from sustaining damage from erosion or tank gauging sticks. Ball. Float and 233 Extractor - The OPW 53VML Ball Float, 233 Extractor and 61 TiII Dro Tube configuration can be installed as an alternative to the 61 SO Overfill application. The installation of the Ball Float/Drop Tube system is identical to the 61 SO Overfill Valve on the OPW Phase t Vapor Recovery System. tatable Swivel Adaptors (Fill and Vapor) - OPW EVR Rotatable Swivel Adaptors are certified installation "on th` fill and vapor ports -on the OPvN Phase 1 EVR system. OPW-Swivel Adaptors vide 360 degrees of rotation of any product or vapor recovery, elbow to prevent the adaptors n loosening on the spill container risers. OPW Swivel Adaptors exceed the EVR requirement to intain a mir imum.360-degree rotation with an average static torque not to exceed 108 inch - ands (9,foot pounds), The enhanced poppet system on the OPW 61VSA-EVR vapor swivel ip>provtdes avapor;kht seal when closed, per EVR requirements. 3ptor Tool -.An OPW 61 SA -TOOL is required to ensure proper installation of OPW Rotatable veI Adaptors, spilt` containers and threaded riser adaptors, per *EVR requirements: The A TOOL Includes provisions for the use of a torque wrench to facilitate accurate rnstallation v.,.. Dust.Caps (Fill Vapor) - OPW EVR Dust Caps are certified for installation on OPW EVR Certified Rotatable Adaptors. OPW EVR Certified Dust Caps feature enhanced ribbed seals and increased sealing forces to provide a bubble -tight seal, per EVR requirements. Available in Duratuff or low -profile metal models. d Riser Ada for >`ae Seal Ada for - An OPW FSA -400 Threaded Riser Face Seal is required to vide` a flat, truepseal ng surface on threaded pipes where a gasket seal r EVR requirements. The FSA -400 is Installed on the fill pipe riser below the spill IF o provide a;true sealing surface for the drop tube flange on the 61 SO-40OC-EVR 'r ve:ion-Valves. The; FSA -400 is also required on tank gauging risers, though is r Vapor n .find rotatable adaptors. Vacuum Vent — The 0 se 1 EVR system. The PW 623V Pressure Vacuum Vent is certified for installation on the .23V's are installed on the top of the vent pipes for underground and internal wire-screen•°are,�designed to protect the tank vent :.age from water, debris or insects. A normally closed poppet in ned pressure or vacuum setting to allow the tank to vent. The ®nt of a maximum vapor leak rate of 0.17CFH at 2.0 inches H2O.