Laserfiche WebLink
6. Overfill Protection System (s ill catchment basinss-,-required) <br />Nonmotor vehicle fuels (See Option IA) <br />I. Level sensin device and 12 or 03 below <br />2. Audible/visna a arm triggered to liquid level sensor <br />3. Automatic shut-off device <br />B. or vehicle fuels only <br />I. ual monitoring <br />a. itten filling procedure provided <br />b. P educe addresses all of the following: <br />1) ual monitoring of fuel level and filling operation <br />2 Ava ble capPacity of tank is at 103% or +200 gallons <br />3 2635- (A)(B)(C)) <br />Metered ut <br />C. Spill catchment basin s ze <br />1. Minimum 5 gallons <br />Secondary containers (Includes leak interception and detection systems). <br />A. Backfill in secondary container -(.Article 39 Section 2635) <br />1. See Article 3 Section 2635(c) (1-8). <br />B. Two or more -primary containers within secondary container (Demonstrate <br />product compatibilities). <br />C. L!quids detected in.secondary containment must be sampled and analyzed for <br />hazardous substances. (Article 3, Section 2635(6) and Health and Safety <br />Code 25291(e)(h). <br />D. Water tight cover for secondary container excavation (Article 3, Section <br />k\V(Ac" 2635(7)). <br />C`' 1. Piping.. <br />A. Double containment required for: <br />1. Product and vapor recovery lines. <br />2. Vent line (excluded only if ball float valve is installed). <br />