COMPLIANCE INFO_2009-2010 - Laserfiche WebLink

Home Browse Search

1 DK -2100 EVR Replacement Drain Valve Performance Specifications: This Spill Container drain valve has been manufactured and tested to the following California specifications: Leak Rate to be less than or equal to 0.17 CFH @ 2.0 " W.C. Operation and Maintenance: To open, pull drain valve chain up and hold open until liquid is drained. To close, release chain. Annually: Inspect and clean the interior of the spill container and drain valve screen. Remove accumulated dirt and grit. Test the drain valve using CARIB procedure TP -201.1C or TP -201.1 D. If the drain valve passes testing no further maintenances required. If the drain valve fail testing, remove the valve, soak in water and use high- pressure air, if needed, to clean. Reinstall the drain valve to its proper position and test the valve with CARB procedure TP -201.1 C or TP -201.1 D. Important: Leave these instructions with Station Operator. Notice: OPW products must be used in compliance with applicable federal, state, and local laws and regulations. Product selection should be based on physical specifications and limitations and compatibility with the environment and material to be handled. OPW makes no warranty of fitness for a particular use. All illustrations and specifications in this literature are based on the latest production information available at the time of publication. Prices, materials, and specification are subject to change at any time, and models may be discontinued at any time, in either case, without notice or obligation. Standard Product Warranty OPW warrants that products sold by it are free from defects in materials and workmanship for a period of one year from the date of manufacture by OPW (ECO products two years from date of manufacture.) Proof of purchase may be required. As the exclusive remedy under this limited warranty, OPW, will at its sole discretion, repair, replace, or issue credit for future orders for any product that may prove defective within the one year date of manufacture period (repairs, replacements, or credits may be subject to prorated warranty for remainder of the original warranty period, complete proper warranty claim documentation required.) This warranty shall not apply to any product that has been altered in any way, which has been repaired by any party other than a service representative authorized by OPW, or when failure is due to misuse, or improper installation or maintenance. OPW shall have no liability whatsoever for special, incidental or consequential damages to any party, and shall have no liability for the cost of labor, freight, excavation, clean up, downtime, removal, reinstallation, loss of profit, or any other cost or charges. For any product certified to California 2001 standards, OPW warrants that product sold by it are free from defects in material and workmanship for a period of one year from date of manufacture or one year from date of registration of installation not to exceed 15 months from date of manufacture by OPW. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND SPECIFICALLY THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THERE ARE NO WARRANTIES, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. A DOVER COMPANY P.O. Box 405003 ' Cincinnati, Ohio 45240-5003 1-800-422-2525 Domestically 513-870-3315 Internationally www.opw-fc.com Copyright, 2003— OPW Fueling Components Inc., Cincinnati, OH Printed in U.S.A. p/n H11471 PA — 9/03 50