Laserfiche WebLink
0 <br />FILL RISER CONTAINMENT SUMP TESTING <br />Facility is Not Equipped With Fill Riser Containment Sumps <br />Fill Riser Containment Sumps are Present, but were Not Tested ❑ <br />Test Method Developed By: ❑ Sump Manufacturer ❑ Industry Standard ❑ Professional Engineer <br />❑ Other (Specify) <br />Test Method Used: ❑ Pressure ❑ vacuum ❑ Hydrostatic <br />❑ Other (Specify) <br />Test Equipment Used: <br />Fill Sump # Fill Sump # <br />Equipment Resolution: <br />Fill Sump # Fill Sump # <br />Sum Diameter: <br />Sump Depth: <br />Height from Tank Top to Top <br />of Highest Piping Penetration: <br />Height from Tank Top to <br />Lowest Electrical Penetration: <br />Condition of sump prior to <br />testing: <br />Portion of Sump Tested <br />Sump Material: <br />Wait time between applying <br />pressure/vacuum/water and <br />starting test: <br />Test Start Time: <br />Initial Reading (R,): <br />Test End Time: <br />Final Reading (RF): <br />Test Duration: <br />Change in Reading (R, -R,): <br />Pass/Fail Threshold or Criteria: <br />Test Result: <br />Pass Fail <br />Pass ❑ <br />Fail <br />Pass ❑ <br />Fail <br />El Pass ❑ <br />Fail <br />Is there a sensor in the sump? <br />❑Yes ❑No <br />❑Yes ❑No <br />❑Yes ❑No <br />❑Yes [:]No <br />Does the sensor alarm when <br />either product or water is <br />detected? <br />❑Yes [:]No [—]N/A <br />❑Yes [:]No ❑N/A <br />❑Yes ❑No ❑N/A <br />❑Yes ❑No ❑N/ <br />Was sensor removed for <br />testing? <br />❑Yes ❑No ❑N/A <br />❑Yes ❑No ❑N/A <br />❑Yes ❑No ❑N/A <br />❑Yes ❑No ❑N/ <br />Was sensor properly replaced <br />and verified functional after <br />testing? <br />❑Yes ❑No ❑N/A <br />❑Yes ❑No ❑N/A <br />❑Yes ❑No ❑N/A <br />❑Yes No ❑N/A <br />Comments — (include information on repairs made prior to testing, and recommended follow-up for <br />failed tests) <br />