Laserfiche WebLink
c <br /> A1%X <br /> A,c <br /> . <br /> FIBERGLASS-COMPOSITE PIPE GROUP <br /> Dualoy 3000/L Fiberglass <br /> Pipe and Fittings <br /> nonmetallic underground piping for <br /> Motor Vehicle (MV), High Blend (HB) <br /> Concentrated ( T) and Aviation and <br /> Marine (A&M)fuels <br /> Uses and applications Service station product,vent and vapor recovery piping <br /> Bulk plant terminals and fueling terminals <br /> Central fuel oil systems <br /> Marinas and marine terminals(onshore only) <br /> All piping systems requiring UL or ULC Listing for MV,HB,CT and A&M Fuels. <br /> Perfof'mance Operating pressures to 300 psig(20 bar) <br /> Continuous operating temperatures to 150°F(66°C) <br /> Individual system components may not have the same ratings as the pipe. Refer to <br /> the detailed product information for the specific components to determine the <br /> pressure rating for the system as a whole. <br /> Listings Dualoy 3000/1-is Listed with Underwriters Laboratories Standard 971-2004 for <br /> nonmetallic underground piping for motor vehicle(MV), high blend(HB), <br /> concentrated(CT)and aviation and marine(A&M)fuels(File MH9162). Dualoy <br /> ® � Underwriters 3000/L pipe and fittings are also Listed with Underwriters Laboratories of Canada <br /> Laboratories Inc.® (File CMH 715). In Great Britain the Dualoy 3000/L system has been tested and <br /> accepted by the London Fire and Civil Defence Authority. Dualoy 3000/L has been <br /> issued a Certificate of Compliance to the Institute of Petroleum(IP)Specification by <br /> ERA Technology, Ltd. <br /> Composition Pipe—Filament-wound fiberglass reinforced epoxy pipe with integral epoxy liner <br /> and exterior coating.When classified in accordance with ASTM D2310 and <br /> ASTM D2996,the pipe meets the following cell limits:RTRP 11CX-5430. <br /> Fittings—Compression-molded and filament-wound fiberglass reinforced epoxy <br /> Adhesive—Ameron PSX•20 ambient-cure,two-part epoxy for all services(including <br /> alcohols) <br /> Joining system Bell and spigot taper/taper adhesive-bonded joint <br /> Pipe lengths Standard 6.1 m(20-ft)random lengths 5.2 to 6.4 m(17 to 21 ft) <br /> Other lengths available on request <br /> FP265K(11/07) <br />