Laserfiche WebLink
The OPW 61T Drop Tube is installed in the fill riser pipe to an underground storage <br />3"T6::.< <br />tank. It is designed to transfer product from the fill connection point (between the <br />6.75 3 07 <br />delivery drop elbow and tight -fill adaptor) to within 6" (or per local requirements) of the <br />4" }T02' <br />bottom of the tank. This allows for submerged filling of the tank, resulting in a more <br />3.05: 8.64 x393: <br />efficient delivery flow rate while reducing the build-up of vapors or foam in the tank. <br />4"102 <br />Features: Ordering Specifications <br />-AX&-ii 13.82 8828 <br />♦ .052" Thick Drop Tube Walls — <br />Drop Tube <br />Deter denting and damage to the <br />3:96 8.96 '1446t` <br />tube upon installation or removal for Product No. in. mm. lbs. k g <br />Length <br />fL m. <br />long service life. <br />♦ Various Lengths and Diameters — 61T-7244 3" 3.14 1 3 <br />10 3 05 <br />Accommodate a variety of tank 61T-7266 4" 5.12 33 <br />10 05 <br />' <br />diameters and `" . _.. _ <br />04 .sizes. " 6.18 .2"12 <br />61T-7268 4 <br />61T 7368 4"a 7.65 48Y <br />15 57 <br />ri <br />61T1012- 4"102 10.16 <br />12ti6 <br />*Grooved tube <br />Replacement gaskets far the 61T-4" and the 61 SO Series <br />are available. Order the OPW 61TG (4000). <br />The OPW 61TC Coaxial Drop Tube is designed to replace an OPW 61T Conventional <br />Drop Tube when Stage I Vapor Recovery is required and a vapor recovery riser pipe <br />is not available on the tank or would require excavation to the top of the tank. The <br />61TC is used in conjunction with OPW 633TC Coaxial Vapor Recovery Adaptors to <br />return vapors to the tank truck, through one riser pipe, during a fuel delivery to an <br />underground storage tank. The upper section of the 61TC is tapered to allow vapors <br />to return to the tank truck through the interstitial space between the riser pipe and out- <br />side wall of the drop tube. Simultaneously, product is delivered to the tank through <br />the center of the 61TC. . <br />QPW 61TCP POPPETTED COAXIAL FILL DROP TUBES <br />The OPW 61TCP Poppetted Coaxial Fill Drop Tube is similar to the 61TC, but is <br />spring-loaded. When used in conjunction with the OPW 633TCP, the 61TCP acts as <br />a poppet to close off the vapor return side of the coaxial fill tube. <br />Features: <br />♦ .052" Thick Drop Tube Walls — <br />Deter denting and damage to the <br />tube upon installation or removal for <br />long service life. <br />♦ Various Lengths and Diameters — <br />Accommodate a variety of tank <br />diameters and fill riser pipe sizes. <br />♦ Fully Welded Retaining Brackets — <br />Ensure a secure installation in the <br />riser pipe. <br />♦ Three Centering Springs — Enable <br />even flow of vapors back to the <br />tank truck. <br />OPW 61T <br />Ordering Specifications <br />Product No. Diameter Length Weight <br />in. mm. fL m. lbs. kg. <br />61TC-7168 <br />3"T6::.< <br />13''-,`,'3!'.'9"6"%r*.' <br />6.75 3 07 <br />61TC-7270 <br />4" }T02' <br />13' <br />3.05: 8.64 x393: <br />61TC-7272 <br />4"102 <br />16 <br />-AX&-ii 13.82 8828 <br />61TCP-3800 <br />4" 102 <br />13' <br />3:96 8.96 '1446t` <br />-71 <br />�.� Telephone: (513) 370-3219 4 (800)422-2525 * Fax: (513) 870-9186 ► Fax: (300) 421-3297 <br />�.: <br />—' '0 Copyright 2000, OPIN Fueling Components A P.O. Box 405003 Cincinnati, OH 45240-5003 4 Printed in USA 7100 <br />