COMPLIANCE INFO_2007-2015 - Laserfiche WebLink

Home Browse Search

Page 4 of 8 6. PIPING SUMP TESTING Test Method Developed By: ❑Sump Manufacturer Z Industry Standard ❑Professional Engineer ❑Other(Specify) Test Method Used: ®Pressure ❑Vacuum 2 Hydrostatic ❑Other(Specify) Test Equipment Used: lhour lake test Equipment Resolution; +/- 1/16" Mom ONE= Reg. Sump Prem. Sump Diesel Sump Sump Sump Diameter: 42" 42" 42" Sump Depth: 46" 46" 44" Sump Material: FG FG FG Height from Tank Top to Top of 21" 21" 22" Highest Piping Penetration: Height from Tank Top to Lowest 14" 12" 15" Electrical Penetration: Condition of sump prior to testing: Dry Dry Dry Portion of Sump Tested' 50% 50% 500/0 Does turbine shut down when sump sensor detects liquid(both product and ❑Yes ❑ No m NA ❑Yes ❑ No R1 NA ❑Yes ❑ No Q NA ❑Yes ❑ No ❑ NA water)?* Turbine shutdown response time N/A N/A N/A Is system programmed for fail-safe ❑Yes ❑ No 0 NA ❑Yes ❑ No 0 NA ❑Yes ❑ No Q NA ❑Yes ❑ No ❑ NA shutdown?' Was fail-safe verified to be ❑Yes ❑ No RI NA ❑Yes ❑ No ® NA ❑Yes ❑ No 0 NA ❑Yes ❑ No ❑ NA o erational?' Wait time between applying pressure/vacuum/water and starting 5 min 5 min 5 min test: Test Start Time: 1 12:20 12:20 12:20 Initial Reading(Ri): 16 7/8" 15 5/8" 19 5/8" Test End Time: 13:20 13:20 13:20 Final Reading(RF): 16 7/8" 15 /8" 19 5/8" Test Duration: 1 hr 1 hr 1 hr Change in Reading(RF-Ri): 0 0 0 Pass/Fail Threshold or Criteria: 1/16 in hour 1/16 in hour 1/16" in hour hilt: Q Pass`G1°Fail ®Pss ❑ Far!` ©Pass ❑Fail. ❑ £'ass "Fail Was sensor removed for testing? 0 Yes ❑ No ❑ NA 0 Yes ❑ No ❑ NA 0 Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA Was sensor properly replaced after m Yes ❑ No ❑ NA 0 Yes ❑ No ❑ NA 0 Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA testing? Comments—(include information on repairs made prior to testing,and recommended follow-up for failed tests) r If the entire depth of the sump is not tested,specify how much was tested. If the answer to as of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)