Laserfiche WebLink
n <br />n <br />0 <br />LI <br />u <br />Cl <br />Name of ATGS <br />Version TLP2 (0.2 gDh Normal Test Mode) <br />L11 -Mita --tions on - Results <br />The performance estimates above are only valid when: <br />The method has not been substantially changed. <br />The vendor's instructions for installing and operating the ATGS are followed. <br />The tank contains a product identified on the method description form. <br />The tank is no larger than 15,000 gallons. <br />The tank is at least 5�0 percent full. <br />The waiting time after adding any substantial amount of product to the tank is 6 hr, <br />40 min hours. <br />The temperature of the added product does not differ more than 6.5 degrees <br />Fahrenheit from that already in the tank. <br />The total data collection time for the test is at least 4 hours. <br />Other limitations specified by the vendor or determined during testing: <br />> Safety disclaimer: This test procedure only addresses the issue of the ATG system's <br />ability to detect leaks. It does not test the equipment for safety hazards. <br />5T.- 111111 119111 i _ _ <br />I certify that the ATGS was installed and operated according to the vendor's instructions <br />and that the results presented on this form are those obtained during the evaluation. I <br />also certify that the evaluation was performed according to one of the following: <br />® standard EPA test procedure for ATGS <br />® alternative EPA test procedure for ATGS <br />G. Joe Hennon/J D Flora Midwest Research Institute <br />(printed name) (organization performing evaluation) <br />c^--�--�- . u • 425 Volker Blvd., Kansas City, MO 64110 <br />(si�rtature) (city, state, zap) <br />May 27, 1992 <br />(date) <br />1816) 753-7600 <br />(phone number) <br />ATGS - Results Form Page 2 of 2 <br />