Laserfiche WebLink
0 <br />D <br />[ JI <br />G <br />u <br />n <br />i11 <br />I <br />r <br />J <br />[7 <br />I � <br />11� <br />Ll <br />11 <br />Name of !t Tank LevelModule <br />Version TLP2 (0.2 aph Rapid Test Mode) <br />Limitations on the Results <br />The performance estimates above are only valid when: <br />• The method has not been substantially changed. <br />• The vendor's instructions for installing and operating the ATGS are followed. <br />• The tank contains a product identified on the method description form. <br />The tank is no larger than 15,000 gallons. <br />The tank is at least 50 percent full. <br />The waiting time after adding any substantial amount of product to the tank is 6 hr, <br />49 min hours. <br />The temperature of the added product does not differ more than 6.5 degrees <br />Fahrenheit from that already in the tank. <br />The total data collection time for the test is at least 1.2 hours. <br />Other limitations specified by the vendor or determined during testing: <br />> Safety disclaimer: This test procedure only addresses the issue of the ATG system's <br />ability to detect leaks. It does not test the equipment for safety hazards. <br />Certificationof Results <br />I certify that the ATGS was installed and operated according to the vendor's instructions <br />and that the results presented on this form are those obtained during the evaluation. I <br />also certify that the evaluation was performed according to one of the following: <br />® standard EPA test procedure for ATGS <br />® alternative EPA test procedure for ATGS <br />G. Joe Hennon/J. I Flora Midwest Research Institute <br />(printed name) (organization performing evaluation) <br />�7A—,- 425 Volker Blvd., Kansas City, MO 64110 <br />(s' ature) (city, state, zip) <br />May 21, 1.992 <br />(date) <br />(81 6) 753-7600 <br />(phone number) <br />ATGS - Results Form Page 2 of 2 <br />