COMPLIANCE INFO_2012-2018 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page of 6. PIPING SUMP TESTING Test Method Developed By: ❑ Sump Manufacturer ❑Industry Standard X Professional Engineer ❑Other(Spec) Test Method Used: ❑Pressure ❑Vacuum X Hydrostatic ❑Other(Sped) Test Equipment Used: Caldwell Systems Equipment Resolution: .005/30 min Sump#1 Sump# Sump# Sump# Sump Diameter: 42" Sump Depth: 55" Sump Material: Fiberglass Height from Tank Top to Top of 17„ Highest Piping Penetration: Height from Tank Top to Lowest 24„ Electrical Penetration: Condition of sump prior to testing: Dry Portion of Sump Tested' 2"above Highest piping penetration Does turbine shut down when sump sensor detects liquid(both x Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA product and water)?* Turbine shutdown response time Is system programmed for fail-safe x Yes ElNo ❑NA ❑Yes ❑No ❑NA 11Yes ElNo ❑NA ❑Yes 11No ElNA shutdown? Was fail-safe verified to be ❑Yes x No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA operational?* Wait time between applying pressure/vacuum/water and starting 5 min 5 min 5 min 5 min test: Test Start Time: 8:45 Initial Reading(RI): .00" .00" .00" .00" Test End Time: 9:15 Final Reading(RF): .00 Test Duration: 30 min 30 min 30 min 30 min Change in Reading(RF-RI): .00 Pass/Fail Threshold or Criteria: .005/30 min .005/30 min .005/30 min .005/30 min Test Result: x Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail Was sensor removed for testing? x Yes ❑No ❑NA x Yes ❑No ❑NA x Yes ❑No [INA ❑Yes ❑No ❑NA Was sensor properly replaced and x Yes ❑No ❑NA x Yes ❑No ❑NA x Yes ❑No ❑NA ❑Yes ❑No ❑NA verified functional after testing? Comments— (include information on repairs made prior to testing, and recommended follow-up for failed tests) 1 If the entire depth of the sump is not tested, specify how much was tested. If the answer to aM of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)