Laserfiche WebLink
SWRCB,January 2002 Page of <br /> 8. FILL RISER CONTAINMENT SUMP TESTING <br /> Facility is Not Equipped With Fill Riser Containment Sums ❑ <br /> Fill Riser Containment Sumps are Present,but were Not Tested ❑ <br /> Test Method Developed By: ❑ Sump Manufacturer I]Industry Standard X Professional Engineer <br /> ❑Other(Specify) <br /> Test Method Used: '-1 Pressure ❑Vacuum X Hydrostatic <br /> ❑Other(Spec) <br /> Test Equipment Used: Caldwell Level Change Indicator Equipment Resolution: .002 <br /> Fill Sump#1-87 Fill Sump#2-91 Fill Sump# Fill Sump# <br /> Sump Diameter: 42" 42" <br /> Sump Depth: 57 ''/2" 56 '/2" <br /> Height from Tank Top to Top of No Piping No Piping <br /> Highest Piping Penetration: Penetrations Penetrations <br /> Height from Tank Top to Lowest 21" 21" <br /> Electrical Penetration: ,. <br /> Condition of sump prior to Dry Dry <br /> testing: <br /> Portion of Sump Tested Water Level 25" Water Level 25" <br /> Sump Material: Fiberglass Fiberglass <br /> Wait time between applying 5 Minutes 5 Minutes <br /> water and starting test: <br /> Test Start Time: 8:57 9:47 <br /> Initial Reading(R,): .001 .001 <br /> Test End Time: 9:27 10:17 <br /> Final Reading(RF): .001 .001 <br /> Test Duration: 30 Minutes 30 Minutes <br /> Chane in Reading (RF—RI): 0 0 <br /> Pass/Fail Threshold or Criteria: .005/30 Minutes .005/30 Minutes <br /> Test Result: Pass Pass <br /> Is there a sensor in the sump? Yes Yes <br /> Does the sensor alarm when <br /> either product or water is Yes Yes <br /> detected? <br /> Was sensor removed for testing? Yes Yes <br /> Was sensor properly replaced and Yes Yes <br /> verified functional after testing?____] <br /> Comments— (include information on repairs made prior to testing, and recommended follow-up for failed tests) <br />