Laserfiche WebLink
I <br />• ` r . . . _ . <br />The High Capacity MLD product line is based on our standard STP -MLD unit design. The <br />High Capacity MLD's compact design allows installation in the same containment sump as <br />the submersible pump, greatly reducing the amount of unprotected leak points between the <br />submersible and the MLD. <br />Specifications: <br />• Detects leaks of 3 gph (11.4 Igp) or greater <br />at 10 psi (69 kpa). <br />• Third party evaluated to comply with US <br />EPA requirements 280.41 (B) and 280.44 <br />(A) for continuous monitoring of <br />pressurized piping systems with maximum <br />of 396.60 gallons for rigid pipelines, <br />maximum of 95.50 gallons for flexible <br />pipelines, maximum of 492.10 gallons for <br />combination of rigid and flexible pipelines. <br />• Size: 7-3/4" x 15" (197 mm x 381 mm). <br />• Weight: 28 pounds (12.7 kg). <br />• The MLD -HC will remain in the open flow <br />position with dynamic line pressure at 2 psi <br />(13.8 kpa) at the outlet. <br />• Maximum static head pressure without <br />affecting operation is 12' (3.7 m) from <br />MLD -HC to dispensing point. <br />• Minimum height required from 3" (76.2 <br />mm) NPT port centerline for top clearance <br />is 9-1/2" (241 mm). Not position sensitive. <br />Can be installed horizontally to reduce <br />clearance to 3" (76.2 mm). <br />42 <br />• Compatible with all blends of motor <br />fuels including alcohol blends from 0 to <br />100% ethanol or methanol, 20% MTBE or <br />ETBE with 80% gasoline, or 17% TAME <br />with 83% gasoline as well as diesel, fuel oil, <br />Avgas, jet fuel or kerosene. <br />• Two models available: STP -MLD -HC for <br />gasoline, STP-MLD-HCD for diesel. <br />Approvals <br />• Consult factory for applicable approvals. <br />Quality Certification <br />• Franklin Fueling Systems is an ISO 9001 <br />Certified Manufacturer. <br />