COMPLIANCE INFO_2012-2018 - Laserfiche WebLink

Home Browse Search

6. PIPING SUMP TESTING Test Method Developed By: ❑Sump Manufacturer Q Industry Standard ❑ Professional Engineer E]Other(Spec) Test Method Used: ®Pressure ❑Vacuum Q Hydrostatic ❑Other(Spec) Test Equipment Used: See attached testing procedures Equipment Resolution: Inches Sump# 87 Sump# 91 Sump# Sump# Sump Diameter: 48" 48" Sump Depth: 63" 63" Sump Material: Fiberglass Fiberglass Height from Tank Top to Top of 12" 12" Highest Piping Penetration: Height from Tank Top to Lowest 24" 24" Electrical Penetration: Condition of sump prior to testing: Fair Fair Portion of Sump Tested' 4"Above highest penetration 4"Above highest penetration Does turbine shut down when sump sensor detects liquid(both ❑Yes❑No Q NA ❑Yes❑No Q NA ❑ Yes ❑No❑NA ❑ Yes ❑No ❑NA product and water)?* Turbine shutdown response time N/A N/A N/A N/A Is system programmed for fail-safe ❑Yes❑No Q NA ❑Yes ❑No Q NA ❑ Yes❑No❑NA ❑ Yes ❑No❑NA shutdown?* Was fail-safe verified to be El Yes❑No Q NA ❑ Yes❑No Q NA ❑Yes❑No❑NA ❑ Yes❑No❑NA operational?* Wait time between applying pressure/vacuum/water and starting 15 minutes 15 minutes test: Test Start Time: 9:37am 9:37am Initial Reading(R,): 0.32065 Inches 0.02566 Inches Inches Inches Test End Time: 9:52am 9:52am Final Reading(RF): 0.32067 Inches 0.02509 Inches Inches Inches Test Duration: 15 mins 15 mins Change in Reading(RF-Ri): 0.00002 0.00057 Pass/Fail Threshold or Criteria: 0.002 0.002 Test Result: ✓❑Pass OFail ®Pass ❑Fail ❑Pass ❑Fail []Pass OFail Was sensor removed for testing? QYes ❑No ❑NA QYes [:]No ❑NA ❑Yes ❑No [INA] ❑Yes []No ❑NA Was sensor properly replaced and QYes ❑No []NA El Yes E3 No [:INA ❑Yes [:]No [:]NA ❑Yes ❑No [:]NA verified functional after testin ? Comments—(include information on repairs made prior to testing,and recommended follow-up,for failed tests)