COMPLIANCE INFO_2000-2009 - Laserfiche WebLink

Home Browse Search

b Lit, P S F Ai AL OPW 633T adaptors screw onto the fillpipe of underground storage tanks. Installation is easy with internal wrenching lugs. Designed for use with the OPW 634TT and 634TE and other similar top seal caps, the OPW 633T accepts top seal fill elbows. All 4" x 4" 633T and 633TE adaptors are now made with two 1/4" notches cut at opposite ends, into the base of the adaptor (below the threads). These notches are to accomodate the corresponding protrusions on the 633LC lock clamp. When the 633T or 633TE is used in conjunction with the 633LC. The adaptor can be locked on to the riser pipe preventing it from being loosened by a delivery elbow. The OPW 633TE adaptor is similar to the 633T, except it does not have internal wrenching lugs. Ordering Specifications �ioduct No. in. mm. lbs. kg. Description 633T-8050 3"x2" 160 0.54 .25 Hardcoated Al. 633T-8060 3"x3" 7606 0.96 .44 Bronze 633T-8070 3"x4" 76x102 . 0.71 .32 Hardcoated A. 6331-8075 4"x4" 102x102 0.82 .37 Hardcoated Al. 633T-8016 4"x4" 102x102 2.70 1.23 Bronze 63317985 4"x4" 102x102 0.45 .20 Duratuff® II 633T-8080 4"x3" 102x76 0.89 .40 Hardcoated Al. 633TE-8160 3"x3" 76x76 0.94 .43 Bronze 633TE-8180 4"x4" 102x102 0.79 .36 Hardcoated Al. 633TE-7986 4"x4" 102x102 0.48 .22 Duratuff' II Replacement Parts Part No. Size Description H -05289-M 3" x 3" Gasket H-041 50-M 3" x 4" Gasket H -04150-M 4" x 4" Gasket H -04145-M 4" x 3" Gasket H -11199-M 4" x 4" Gasket 633T-8076 Dimensions OPW 633T 3"x2" Thread 2" in. mm. A 3 3%64 " 92 B 3 3%64 " 92 OPW 633T 3"x 3" Thread 3" 1 %" 41 in. mm. A 3'%4" 0— B 36%4 100 C 1% 41 OPW 633T 3"x 4" Thread 4" OPW 633LC lock clamp is designed to slip on to a riser pipe. The 633T or 633TE fill adaptor is then threaded on to the riser pipe. Next the lock clamp should be slid up the riser until the protrusions in the lock clamp line up with the notches in the adaptor. Once the adaptor and clamp are engaged the lock clamp can be tightened and the adaptor will be locked in place to create a vapor tight seal. Additionally the lock clamp can be turned upside down on the riser pipe to lock the riser into the base of all OPW spill contain- ers, which have notches in them similar to the 633T and 633TE adaptors. Using the lock clamp in this manor will lock the riser pipe into the spill container. Materials: Clamp: Stainless Steel Bolt: Zinc Plated Steel Set Screws: Stainless Steel Ordering Specifications Product No. in. mm. Description 633LC-1000 4" 102 Stainless Steel s DPW 633T TOP SEAL ADAPTOR OPW633LC RISER LOCK CLAMP PIPE BOLT & NUT -SET SCREW OPW633LC LOCK CLAMP SPILL CONTAINER BASE 11 11 in. mm. A 3 39/64" 92 B 5%4" 128 C OPW 633T 4"x3" Thread 3" 2'%6" 68 in. mm. A 4 65/64" 123 B 4'%4" 123 C OPW 633T 4"x4" Thread 4" 213/6" 55 in. mm. A 4 55/64" 123 B 4 25/32" 121 C 2 5/32" 67 OPW 633LC lock clamp is designed to slip on to a riser pipe. The 633T or 633TE fill adaptor is then threaded on to the riser pipe. Next the lock clamp should be slid up the riser until the protrusions in the lock clamp line up with the notches in the adaptor. Once the adaptor and clamp are engaged the lock clamp can be tightened and the adaptor will be locked in place to create a vapor tight seal. Additionally the lock clamp can be turned upside down on the riser pipe to lock the riser into the base of all OPW spill contain- ers, which have notches in them similar to the 633T and 633TE adaptors. Using the lock clamp in this manor will lock the riser pipe into the spill container. Materials: Clamp: Stainless Steel Bolt: Zinc Plated Steel Set Screws: Stainless Steel Ordering Specifications Product No. in. mm. Description 633LC-1000 4" 102 Stainless Steel s DPW 633T TOP SEAL ADAPTOR OPW633LC RISER LOCK CLAMP PIPE BOLT & NUT -SET SCREW OPW633LC LOCK CLAMP SPILL CONTAINER BASE 11 11