COMPLIANCE INFO_2006-2010 - Laserfiche WebLink

Home Browse Search

ONIT 'ZING SYSTEM CERTIFIC TION se By All Jurisdictions Within the State of Califorrmi Authority Cited:Chapter 6.7,Hea th and Safety Code;Chapter 16,Division 3 Title 23, G rifomia Code of Regulations This form must be used to document testing and servicing of monitoring equipment. If more than one monitoring system control panel is installed at the facility,a separate certification or report must be prepared for each monitoring system control panel by the technician who performs the work. A copy of this form must be provided to the tank system owner/operator. The owner/operator must submit a copy of this form to the local agency regulating UST systems within 30 days of test date. A General Information Facility Name: CHEVRON 209167 City: MANTECA CA Zip:95336 Site Address: 1234 E.YOSEMITE AVE Contact Phone No: 824-7433 @ SPRECKLES Date of Testing/Service: 04/24/2008 Facility Contact Person: MANAGER-KIM Make/Model of Monitoring System:VR TLS350 PLUS Work Order Number: 2256287 B.Inventory of Equipment Tested/Certified Check the appropriate boxes to indicate specific equipment inspected/serviced Tank ID: 1 91 TanklD: 2 87 X In-Tank Gauging Probe. Model: MAG ZI In-Tank Gauging Probe. Model: MAG X Annular Space or Vault Sensor. Model: 409 Annular Space or Vault Sensor. Model: 409 X Piping Sump/Trench Sensor(s). Model: 208Piping Sump/Trench Sensor(s). Model: 208 Fill Sump Sensor(s). Model: Fill Sump Sensor(s). Model: Mechanical Line Leak Detector. Model: Mechanical Line Leak Detector. Model: X Electronic Line Leak Detector. Model: VR PLLD X Electronic Line Leak Detector. Model: VR PLLD Tank Overfill/High-Level Sensor. Model: Tank Overfill/High-Level Sensor. Model: Other(specify equipment type and model in Section E on page 2). Other(specify equipment type and model in Section E on page 2). Tank ID* Tank ID: In-Tank Gauging Probe. Model: In-Tank Gauging Probe. Model: Annular Space or Vault Sensor. Model: Annular Space or Vault Sensor. Model: Piping Sump/Trench Sensor(s). Model: Piping Sump/Trench Sensor(s). Model: Fill Sump Sensor(s). Model: Fill Sump Sensor(s). Model: Mechanical Line Leak Detector. Model: Mechanical Line Leak Detector. Model: Electronic Line Leak Detector. Model: Electronic Line Leak Detector. Model: Tank Overfill/High-Level Sensor. Model: Tank Overfill/High-Level Sensor. Model: Other(specify equipment type and model in Section E on page 2). Other(specify equipment type and model in Section E on page 2). Dispenser : 1/2 Dispenser ID: 7/8 XDis Dispenser Containment Sensors Model:208ContainmentX Dispenser Sensor(s) Model: 208 ®Shear Valve(s). X Shear Valve(s) ❑Dispenser Containment Float(s)and Chain(s). 7 Dispenser Containment Float(s)and Chain(s). Dispenser ID: 3/4 DispenserlD: 9/10 0 Dispenser Containment Sensor(s) Model:208 X Dispenser Containment Sensor(s). Model:208 X❑ Shear Valve(s). Shear Valve(s). Dispenser Containment Float(s)and Chain(s). Dispenser Containment Float(s)and Chain(s). Dispenser ID: 5/6 Dispenser ID: 11/12 Dispenser Containment Sensor(s) Model:208 X Dispenser Containment Sensor(s). Model:208 Shear Valve(s). X Shear Valve(s). 10 Dispenser Containment Float(s)and Chain(s). Dispenser Containment Float(s)and Chain(s). "If the facility contains more tanks or dispensers,copy this form.Include information for every tank and dispenser at the facility. C. Certification I certify that the equipment identified in this document was inspected/serviced in accordance with the manufacturers'guidelines. Attached to this certification is information(e.g manufacturers'checklists)necessary to verify that this information is correct. and a Site Plan showing the layout of monitoring equipment.For any equipment capable of generating such reports, I have also attached a copy of the(Check all that apply): ❑X System set-up X❑Alarm history report Technician Name(print): KENNETH LEE Signature: Certification No.: License.No.: Testing Company Name:Tanknology Phone No.: (800)800-4633 Site Address: 8501 N.MoPac Expressway,suite 400,Austin,TX 78759 Date of Testing/Servicing: 04/24/2008 Monitoring System Certification Page 1 of 3 Based on CA form dated 03/01