Laserfiche WebLink
GLOSSARY OF <br /> DATA QUALIFIERS USED IN INORGANIC REPORTS <br /> B - Indicates that this result is less than <br /> the Contract <br /> Laboratory Program Contract Required Detection Limit (CRDL) <br /> but is greater than the instrument detection limit (IDL) . <br /> [7 - Indicates that this analyte was analyzed for, but not <br /> detected. <br /> =r <br /> E - The reported result is estimated because of the presence of <br /> f an interference. <br /> M - Applicable to concentrations greater than the CRDL, the <br /> relative percent difference between duplicate injections was <br /> [; greater than 20%. <br /> N - Spike recovery was not within control limits. <br /> 9 <br /> S The reported value was determined by Method of Standard <br /> Addition (NSA) . <br /> ,. <br /> + - The correlation coefficient for the MSA is less than 0.995. <br /> 1 W - The post-digestion spike is out of the 85-115 control limit <br /> and the sample absorbance is less than 50$ of the spike <br /> ` absorbance. <br /> - The duplicate analysis was not within control limits. <br /> p - Analyzed by <br /> inductively coupled argon plasma. <br /> g - Analyzed by graphite furnace atomic absorption spectroscapy. <br /> CV - Mercury was analyzed by the method of cold vapor generation. <br /> M AS - Analyzed by manual spectrophotometric methods. <br /> M5 - indicates "matrix spike." <br /> D - Indicates "duplicate sample." <br /> ---��------._ control-sample�rr-------- --...— -- ---------- ----- --.., <br /> LCS^- Indicates laboratory <br /> NOTES: <br /> Unless otherwise stated, results for .soil/sludge/sediments <br /> are reported on a dry weight basis. <br />