Laserfiche WebLink
GROUNDWATER TECHNOLOGY <br /> STANDARD OPERATING PROCEDURE <br /> CONCERNING GROUNDWATER MONITORING <br /> SOP 8 <br />' Groundwater monitoring of wells at the site shall be conducted using an ORS Interface Probe and <br /> Surface Sampler The Interface Probe is a hand held, battery operated device for measuring depth <br /> to petroleum product and depth to water as measured from an established datum (I e, top of the <br /> well casing which has been surveyed) Product thickness is then calculated by subtracting the <br /> tdepth to product from the depth to water In addition, water elevations are adjusted for the <br /> presence of fuel with the following calculation <br /> Product Thickness 8 + (Water Elevation) = Corrected Water Elevation <br />' NOTE The factor of 0 8 accounts for the density difference between water and petroleum <br /> hydrocarbons <br /> The Interface Probe consists of a dual sensing probe utilizing an optical liquid sensor and electrical <br /> conductivity to distinguish between water and petroleum products A coated steel measuring tape <br /> transmits the sensor's signals to the reel assembly, where an audible alarm sounds a continuous <br />' tone when the sensor is Immersed In petroleum product and an oscillating tone when Immersed in <br /> water The Interface Probe Is accurate to 1/16-inch <br />' A Surface Sampler shall be used for visual inspection of the groundwater to note sheen s(difficult to <br /> detect with the Interface Probe), odors, microbial action, etc <br /> The Surface Sampler used consists of a 12-Inch long cast acrylic tube with a Delrin ball which closes <br /> tonto a conical surface creating a seal as the sampler is pulled up The sampler is calibrated In <br /> Inches and centimeters for visual Inspection of product thickness <br />' <br /> To reduce a th potential for cross contamination between wells, the monitorings shall take place in <br /> 1 order from the least to most contaminated wells Wells containing free product should be monitored <br /> last Between each monitoring the equipment shall be washed with laboratory grade detergent and <br /> double rinsed with distilled water <br /> E'7141 CROUNDWATER <br />' i D I TECHNOLOGY,INC <br />