Laserfiche WebLink
1 <br /> SMTH SITE SAFETY PLAN <br /> Physical Hazards <br /> ' Task(s) Hazard Mitigation Measure <br /> 7 Heavy Equipment (Noise & Physical All heavy equipment used on this project will be <br /> contact) in good working order and operated in <br /> accordance with recognized industry standards <br /> and Cal-OSHA Tide 8, Subchapter 4, <br /> Construction Safety Orders. In a"don. an <br /> ' exclusion zone applies to all personnel. The <br /> exclusion zone will be 20 feet to the front and <br /> either side of the operating drill ng. Personnel <br /> will not be allowed under booms or augers at <br /> ' any time. <br /> All equipment operators and ground crews <br /> working in dose proximity of heavy equipment <br /> ' will be supplied with am protection. <br /> Dust The dust hazard will be mitigated by not <br /> allowing ground crew to be located down wind <br /> ' of drilling and excavation activity. In addition, <br /> water will be applied to control the dust if <br /> visible levels of dust are generated. <br /> Fire and Explosion Hazards <br /> ' List Flammable or Combustible materials on-site Keep sources of ignition away from these materials <br /> ' Flammable (Flash Point <100 °F) Combustible (Flash Point <200 °F) <br /> Gasoline <br /> ' <br /> Type and Location of Fire Extinguishers fShow on map for large projects) <br /> Dry chemical fire extinguishers. Class A. 13, and C. are stored in all SMTH vehicles <br /> PAGE 4 <br />