Laserfiche WebLink
C <br />Delta Plating Inc. <br />Inspection Report <br />Page 3 of 4 <br />Facility Current Status: <br />Number of regulated Units: 2 Permit By Rule Units <br />nera <br />Aqueous waste with Metals — pH adjustment, neutralization, precipitation, <br />flocculation <br />Special Waste / Sludge containing metals — Filter Press <br />Aqueous waste — Hexavalent Chromium — Reduction <br />Inorganic Acid /Alkaline waste — pH adjustment, neutralization <br />Cyanide destruction not in use (pending authorization) <br />SITE WALKTHROUGH: <br />Upon our arrival, we met with Mr. Douglas Baker at the front of the office and <br />proceed to his office. <br />We discussed the purpose of the site inspection and requested permission to <br />perform the inspection and also take photographs. Mr. Douglas Baker gave his <br />permission for both activities. Mr. Baker gave us a short history of the facility and <br />description of the current production activities. <br />We returned to his office after the walkthrough. I explained our observation <br />during the inspection I pointed out that facility should stop painting <br />of the <br />wastewater tr ae tment area until completion of investigation. 1 also explained that <br />areas of concern in the main plating room, wastewater treatment area and storm <br />drain area outside the plating room existed, see attachment A photographs. <br />CONCLUSION / RECOMMENDATION: <br />Based on DTSC's findings from this inspection conducted on May 20, 2004, <br />further investigation in the three areas of concern is recommended. Two of the <br />AOCs identified in the checklist were also identified in the DTSC's inspection. I <br />also explain the corrective action consent agreement process with Mr. Baker. <br />