|
OPW Installation i
<br /> OPW 1-3100 Series Thread-On Double Wall Grade level Spill Containers
<br /> IMPORTANT:Please read these warnings and use the WARRANTIES,EXPRESS OR IMPLIED,AND
<br /> assembly instructions completely and carefully before SPECIFICALLY THE WARRANTIES OF
<br /> starting.Failure to do so may cause product failure,or MERCHANTABILITY AND FITNESS FOR A
<br /> result in environmental contamination due to liquid PARTICULAR PURPOSE. THERE ARE NO
<br /> leakage into the soil,creating hazardous spill conditions. WARRANTIES,WHICH EXTEND BEYOND THE
<br /> DESCRIPTION ON THE FACE HEREOF.
<br /> IMPORTANT:The OPW 1-3100 Spill Container is pre-
<br /> assembled for your convenience and ease of installation. In some states it is prohibited to use spill container drain
<br /> Check to make sure the unit is Intact and undamaged and valves on spill containers that are exclusively used for
<br /> all parts have been supplied.Never substitute parts for vapor return risers. Install only 1-3100 Series Thread-On
<br /> those supplied.Doing so may cause product failure. spill container models equipped with a drain plug.
<br /> WARNING-DANGER:Using electrically operated WARNING: If the snowplow ring is removed,for any
<br /> equipment near gasoline or gasoline vapors may result in reason,follow the Operation and Maintenance instruction
<br /> a fire or explosion,causing personal injury and property as noted. Replace o-rings and seals and install new ones.
<br /> damage.Be sure that the working area is free from such Never reuse damaged o-rings or seals as it may result in
<br /> hazards,and always use proper precautions. an improper seal.Only qualified,competent,well-trained
<br /> NOTE:At all times when product is in the storage tank technicians should perform maintenance.Common sense
<br /> keep the riser pipe capped,so the vapors cannot escape and good judgment should always be exercised. The
<br /> Into the environment. contractor's understanding of all related site conditions
<br /> prior to starting the project is essential. If the contractor
<br /> Notice:OPW products must be used in compliance with does not have a clear understanding of the required work
<br /> applicable federal,state,and local laws and regulations. and site conditions,the contractor is advised to seek
<br /> Product selection should be based on physical clarification prior to starting any portion of the project.
<br /> specifications and limitations and compatibility with the
<br /> environment and material to be handled. All illustrations NOTICE TO DELIVERY DRIVER: All delivery drivers
<br /> and specifications in this literature are based on the latest MUST inspect the inside of the container for water or
<br /> production information available at the time of publication. contaminants other than fuel prior to delivery. If water or
<br /> Prices, materials,and specification are subject to change contaminates are present,then they MUST be removed
<br /> at any time,and models may be discontinued at any time, before proceeding. Dispose of towels and debris safely
<br /> in either case,without notice or obligation. and per all applicable local,state,and federal codes. After
<br /> delivery is complete,the driver MUST drain any excess
<br /> Standard Product Warranty fuel that may have spilled into the container from their
<br /> OPW warrants that products sold by it are free from delivery hose.
<br /> defects in materials and workmanship for a period of one
<br /> year from the date of manufacture by OPW(ECO products 1-3100 Series Performance Specifications:
<br /> two years from date of manufacture.)Proof of purchase This Spill Container drain valve has been manufactured
<br /> may be required. As the exclusive remedy under this and tested to the following specifications:Leak Rate to be
<br /> limited warranty,OPW,will at its sole discretion,repair, less than or equal to 0.17 CFH @ 2.0"W.C.
<br /> replace,or issue credit for future orders for any product
<br /> that may prove defective within the one year date of Torque Specification:
<br /> manufacture period(repairs,replacements,or credits may Spill Container 4"NPT, 125 ft-lbs minimum to 250 ft-lbs
<br /> be subject to prorated warranty for remainder of the maximum.
<br /> original warranty period,complete proper warranty claim
<br /> documentation required.) This warranty shall not apply to 4"Nipple:4"NPT,125 ft-lbs minimum to 250 ft-lbs
<br /> any product that has been altered in any way,which has maximum.
<br /> been repaired by any party other than a service
<br /> representative authorized by OPW,or when failure is due Note: All 4"NPT threads are to be torqued progressively
<br /> to misuse,or improper installation or maintenance. OPW lower from the tank up.
<br /> shall have no liability whatsoever for special,incidental or
<br /> consequential damages to any party,and shall have no Drain Valve clamps:5/16-18 UN thread, 11.5 ft-lbs
<br /> liability for the cost of labor,freight,excavation,clean up, minimum to 13.5 ft-lbs maximum,
<br /> downtime,removal, reinstallation,loss of profit,or any
<br /> other cost or charges. Ring and Nipple Adaptor Bolts:3/8-16 UN,20 ft-lbs
<br /> For any product certified to California 2001 standards, minimum to 25 ft-lbs maximum.
<br /> OPW warrants that product sold by it are free from defects
<br /> in material and workmanship for a period of one year from Tools Recommended:
<br /> date of manufacture or one year from date of registration 1-3100-TOOL—Torque Installation Tool
<br /> of installation not to exceed 15 months from date of DW-VAC-TEST—Vacuum Test Equipment
<br /> manufacture by OPW. (or 202310 Test Adaptor)
<br /> THIS WARRANTY IS IN LIEU OF ALL OTHER
<br />
|