COMPLIANCE INFO_2012-2018 - Laserfiche WebLink

Home Browse Search

SWRCB, January 2002 Page of 7. UNDER -DISPENSER CONTAINMENT (UDC) TESTING Test Method Developed By: ❑ UDC Manufacturer ❑ Industry Standard X Professional Engineer ❑ Other (Spec) Test Method Used: ❑ Pressure ❑ Vacuum X Hydrostatic ❑ Other (Spec) Test Equipment Used: Caldwell Level Change Indicator Equipment Resolution: .002 UDC # 1&2 UDC # 3&4 UDC # 5&6 UDC #7&8 UDC Manufacturer: Bravo Bravo Bravo Bravo UDC Material: Coated Steel Coated Steel Coated Steel Coated Steel UDC Depth: 10" 10" 10" 10" Height from UDC Bottom to Top of Highest Piping Penetration: Enters from bottom Enters from bottom Enters from bottom Enters from bottom Height from UDC Bottom to Lowest Electrical Penetration: Enters from bottom Enters from bottom Enters from bottom Enters from bottom Condition of UDC prior to testing: Dry Dry Dry Dry Portion of UDC Tested Water Level 8" Water Level 8" Water Level 8" Water Level 8" Does turbine shut down when UDC sensor detects liquid (both product and water)?* No No No No Turbine shutdown response time N/A N/A N/A N/A Is system programmed for fail- safe shutdown?* Yes Yes Yes Yes Was fail-safe verified to be o erational?` No No No No Wait time between applying water and starting test 5 Minutes 5 Minutes 5 Minutes 5 Minutes Test Start Time: 9:50 9:55 9:45 9:40 Initial Reading (RI): .001 .001 .001 .001 Test End Time: 10:20 10:25 10:15 10:10 Final Reading (RF): .001 .001 .001 .001 Test Duration: 30 Minutes 30 Minutes 30 Minutes 30 Minutes Change in Reading (RF -RI): 0 0 0 0 Pass/Fail Threshold or Criteria: .005/30 Minutes .005/30 Minutes .005/30 Minutes .005/30 Minutes Test Result: X Pass ❑ Fail X Pass ❑ Fail ` X Pass ❑ Pail X Pass ❑ Fail `. Was sensor removed for testing? X Yes ❑ No ❑ NA X Yes ❑ No ❑ NA X Yes ❑ No ❑ NA X Yes ❑ No ❑ NA Was sensor properly replaced and verified functional after testing? X Yes ❑ No ❑ NA X Yes ❑ No ❑ NA X Yes ❑ No ❑ NA X Yes ❑ No ❑ NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) ' If the entire depth of the UDC is not tested, specify how much was tested. If the answer to as of the questions indicated with an asterisk (*) is "NO" or "NA", the entire UDC must be tested. (See SWRCB LG -160)