Laserfiche WebLink
BUST SYSTEM PRINTSET INFORMATION <br /> • <br /> 1. w Z Four complete sets of plans (To include specification sheets and/or equipment brochures if not on file). <br /> 2. Plans drawn to scale in non-erasable print. <br /> 3. Plot plan to show location and number of tanks. <br /> 4. I,tel Tank cross-sectional diagram included on prints submitted. <br /> 5. VDetail of tank, piping system, excavation and cover. <br /> 6. ✓ Tank(s) and piping approved by a nationally recognized independent testing organization. [Title 23, Subchapter 16, <br /> Article 3, Sec. 2631 (r) & 26353 <br /> 7. V/2 Verification of product compatibility with the tank(s), piping, monitoring <br /> device(s), epoxy or silicone glues, etc. [Section 2635 (b) (2)] <br /> 8. ManufacturrIs written installation instructions for tank(s), piping, monitoring devices, etc. [Section 2635 (b) (5)] <br /> j1ivPP1.. v wtticor -rPrMt-s, <br /> 9. �� Tightness Test (NFPA 30) is required on both primary (10) and secondary (20) containment systems before covering. <br /> [Section 2635 (b) (6) & (7)] <br /> 10. /J Double walled tanks using pressure or vacuum testing to monitor the annular space. [Section 2635 (b) (7)] <br /> 11. V NFPA 329 'Precision Test' required upon completion of installation with tank in operating condition. Test results to <br /> be submitted directly to PHS/EHD from the testing company or owner of facilit [Heath Safety Code, Division 20, <br /> Chapter 6.7, Section 25291 (g)] <br /> 12. TANK COMPOSITION <br /> TANK # #'r # �Z # # s # <br /> CAPACITY © 000 6X (D,000 G144.. 10,000 [O <br /> MANUFACTURER <br /> COMPOSITION FI Cs SS ReA%;V_-t4&<V f•'Ip.V(0Ls0,P PIOMOL443, <br /> MODEL A RCp; Q �7 60CAkv Aga-7 <br /> ol <br /> PRODUCT L.1I,3e. L4P6 EWPOL4.0 <br /> CORROSION PROTECTION t f�! LA�i<i q*ePfai4Q'17 <br /> U.L. LISTED 114.4-011AA H �� r/.F1GIC(Ql (,''jA+gC 1 <br /> COMPATIBILITY WITH 100% trez <br /> METHANOLIL <br /> ''[[ <br /> 13. TANK(s) TO BE INSTALLED <br /> A. Steel-clad with fiberglass reinforced plastic. <br /> B. Holiday test required immediately before "setting" tank(s) (35,000 - 40,000 volts). [Section 2635 (b) (4)] <br /> C. Fiberglass [Sections 2635 (3) and 2631 (p)] <br /> ✓ (1) Striker plate dimensions and materials. <br /> 49"V (2) Striker plate under all accessible openings. <br /> ✓ (3) Installation instructions require an air test and soap bubble test prior to installation. <br /> KeA D. Non-clad steel tank [Section 2635 (b)] <br /> (1) Cathodic protection provided for entire tank, piping and components (nuts, bolts, washers, <br /> etc.). <br /> (2) Approved by a corrosion engineer or N.A.C.E. technician. <br /> s <br /> (3) Document stating inspection method and frequency(minimum semi-annual inspection requirement). <br /> 4 <br />