Laserfiche WebLink
C <br />Manual No: 577013-815 • Revision: C <br />Variable Speed Flow Controller <br />. 0 . , <br />• PLLD Pressure Transducer must be installed in the STP and <br />Variableconnected to the • • Flow Controller <br />VSFC to control the STP. <br />For VSFC standalone installations (i.e., sites without a TLS -350 <br />Console, or sites having a TLS -350 without PLLD line leak <br />detection), a PLLD Pressure Transducer is required in the STP (V -R <br />kit P/N 330020-45X). To install this transducer refer to relevant <br />sections of the PLLD Site Prep guide (V -R P/N 576013-902). <br />For VSFC installations in sites that include a TLS -350 Console <br />with PLLD line leak detection, a separate PLLD Pressure <br />Transducer is not required because the VSFC unit and the PLLD <br />system will share the same transducer. <br />For all VSFC installations, you must connect the PLLD Pressure <br />Transducer's cable to the VSFC unit following the instructions in <br />this VSFC installation Guide. <br />Unit is shipped from factory preconfigured in stand-alone mode. <br />There is no need to change any settings except the pressure <br />switch if unit will be installed in a stand-alone application. <br />