Laserfiche WebLink
Introduction Safety Precautions <br />The installer must ensure that all grounds are properly connected. Failure to <br />connect any ground wire may result in severe personal injury, death, <br />substantial property damage or sub -par performance of the system. <br />0 <br />The VSFC unit contains high voltages which can be lethal. It is also connected <br />to low power devices that must be kept intrinsically safe. <br />Do not connect the VSFC AC power supply wires at the breaker until all <br />devices are installed. <br />Attach conduit from the power panel to the unit's power side knockouts only. <br />Power and communication wiring/conduit must not enter the intrinsically -safe <br />side of the VSFC unit. <br />Connecting power wires to a live circuit can cause electrical shock that may <br />result in serious injury or death. <br />Routing conduit for power wires into the intrinsically -safe compartment can <br />result in fire or explosion resulting in serious injury or death. <br />Explosive vapors or flammable liquids could be present near locations where <br />O� fuels are stored or being dispensed. <br />The VSFC unit is not explosion proof. Do not install this device in a volatile, <br />combustible, or explosive atmosphere. <br />An explosion or fire resulting in serious injury or death, property loss and <br />equipment damage could occur if the VSFC unit is installed in a volatile, <br />combustible or explosive atmosphere (Class 1, Division 1 or 2). <br />