COMPLIANCE INFO_1996-2004 - Laserfiche WebLink

Home Browse Search

MONITORING SYSTEM CERTIFICATION ow,7bn1crick3gySth se By All Jurisdictions Within the State of CalifoffAuthority Cited.Chapter 6.7, and Safety Code,,Chapter 16,Division 3 rtle 23, lifomia Code of Regulations This form must be used to document testing and servicing of monitoring equipment. If more than one monitoring system control panel is installed at the facility,a separate certification or report must be prepared for each monitoring system control panel by the technician who performs the work. A copy of this form must be provided to the tank system owner/operator. The owner/operator must submit a copy of this form to the local agency regulating UST systems within 30 days of test date. A.General Information Facility Name: ULTRAMAR 641 City: STOCKTON CA Zip:95210 Site Address: 1210 E.HAMMER LANE Contact Phone No:477-3111 @ WEST LANE Facility Contact Person: MGR-VALERIE Date of Testing/Service: 08/12/2002 Make/Model of Monitoring System: EMC Work Order Number: 2223218 B.Inventory of Equipment Tested/Certified Check the appropriate boxes to indicate specific equipment inspected/serviced Tank ID: RUL Tank ID: PLUS In-Tank Gauging Probe. Model: In-Tank Gauging Probe. Model: X Annular Space or Vault Sensor. Model: 794390460 0 Annular Space or Vault Sensor. Model: 794360460 Piping Sump/Trench Sensor(s). Model: Q Piping Sump/Trench Sensor(s). Model: Fill Sump Sensor(s). Model: Fill Sump Sensor(s). Model: Mechanical Line Leak Detector. Model: Mechanical Line Leak Detector. Model: FX1 V Electronic Line Leak Detector. Model: Electronic Line Leak Detector. Model: Tank Overfill/High-Level Sensor. Model: Tank Overfill/High-Level Sensor. Model: Other(specify equipment type and model in Section E on page 2). Other(specify equipment type and model in Section E on page 2). Tank ID: jUI1 Tank ID: In-Tank Gauging Probe. Model: In-Tank Gauging Probe. Model: )( Annular Space or Vault Sensor. Model: 794390460 Annular Space or Vault Sensor. Model: Piping Sump/Trench Sensor(s). Model: Piping Sump/Trench Sensor(s). Model: Fill Sump Sensor(s). Model: Fill Sump Sensor(s). Model: }( Mechanical Line Leak Detector. Model: FX1 V Mechanical Line Leak Detector. Model: Electronic Line Leak Detector. Model: Electronic Line Leak Detector. Model: Tank Overfill/High-Level Sensor. Model: Tank Overfill/High-Level Sensor. Model: Other(specify equipment type and model in Section E on page 2). Other(specify equipment type and model in Section E on page 2). Dispenser Dispenser ID: Dispenser Containment Sensor(s) Model: Dispenser Containment Sensor(s) Model: ®Shear Valve(s). Shear Valve(s) EjDispenser Containment Float(s)and Chain(s). Dispenser Containment Float(s)and Chain(s). Dispenser ID: Dispenser ID: FiDispenser Containment Sensor(s) Model: Dispenser Containment Sensor(s). Model: F] Shear Valve(s). Shear Valve(s). Dispenser Containment Float(s)and Chain(s). Dispenser Containment Float(s)and Chain(s). Dispenser ID: Dispenser lD: ❑ Dispenser Containment Sensor(s) Model: F1 Dispenser Containment Sensor(s). Model: ❑ Shear Valve(s). Shear Valve(s). Dispenser Containment Float(s)and Chain(s). ElDispenser Containment Float(s)and Chain(s). If the facility contains more tanks or dispensers,copy this form.Include information for every tank and dispenser at the facility. C. Certification I certify that the equipment identified in this document was inspected/serviced in accordance with the manufacturers'guidelines. Attached to this certification is information(e.g manufacturers'checklists)necessary to verify that this information is correct. and a Site Plan showing the layout of monitoring equipment.For any equipment capable of generating such reports,1 have also attached a copy of the(Check all that apply): System set-up report; F-] Alarm history report X❑ PRINTED NAME:DAVID MATHIE SIGNATURE: COMPANY: Tanknology PHONE NO: (800)800-4633 page 1 of 3 Based on CA form dated 03/01