Laserfiche WebLink
PSI at tank bottom: <br />Fluid level in inches: <br />UFT/OFT: <br />Fluid volume in gallons: <br />Tank water level in inches: <br />Test time: <br />Number of thermisters: <br />Specific gravity: <br />Water table depth in inches: <br />Determined by (method): <br />Leak rate in gph: <br />Result: <br />COMMENTS <br />Test time: <br />Uilage volume: <br />Ullage pressure: <br />Results: <br />New/passed Failedfreplaced New/passed Failed/replaced <br />L.D. #1 L.D. #1 L.D. #2 L.D. #2 <br />Make: FE PETRO <br />Model: MLD <br />INDIVIDUAL TANK INFORMATION AND TEST RESULTS <br />NOT <br />I► Thnkno1bgy <br />TESTED <br />Holding psi: 3 <br />8501 N MOPAC EXPRESSWAY, SUITE 400 <br />TEST DATE: 07/21/06 <br />AUSTIN, TEXAS 78759 (512) 451-6334 <br />WORK ORDER NUMBER: 2243848 <br />CLIENT: CONOCO-PHILLIPS <br />Metering psi: 10 <br />SITE: CONOCO PHILLIPS #2705447 <br />Tank ID: DSL 4 <br />Tank manifolded: No <br />Bottom to top fill in inches: <br />Product: DIESEL <br />Vent manifolded: NO <br />Bottom to grade in inches: <br />Capacity in gallons: 10,369 <br />Vapor recovery manifolded: No <br />Fill pipe length in inches: <br />Diameter in inches: 120.00 <br />Overfill protection: YES <br />Fill pipe diameter in inches: <br />Length in inches: 214 <br />Overspill protection: YES <br />Stage I vapor recovery: NONE <br />Material: DW FISERG <br />Installed: ATG <br />Stage II vapor recovery: NONE <br />CP installed on: / / <br />PSI at tank bottom: <br />Fluid level in inches: <br />UFT/OFT: <br />Fluid volume in gallons: <br />Tank water level in inches: <br />Test time: <br />Number of thermisters: <br />Specific gravity: <br />Water table depth in inches: <br />Determined by (method): <br />Leak rate in gph: <br />Result: <br />COMMENTS <br />Test time: <br />Uilage volume: <br />Ullage pressure: <br />Results: <br />New/passed Failedfreplaced New/passed Failed/replaced <br />L.D. #1 L.D. #1 L.D. #2 L.D. #2 <br />Make: FE PETRO <br />DATA FOR UTS-4T ONLY: <br />Time of test 1: <br />Temperature: NOT <br />Flow rate (cfh): TESTED <br />Time of test 2: <br />Temperature: <br />Flow rate (cfh): <br />Time of test 3: <br />Temperature: <br />Flow rate (cfh): <br />COMMENTS <br />Material: <br />Diameter (in): <br />Length (ft): <br />Test psi: <br />Bleedback cc: <br />Test time (min): <br />Test 1: Start time: <br />Finish psi: <br />Vol change cc: <br />Test 2: Start time: <br />Finish psi: <br />Vol change cc: <br />Test 3: Start time: <br />Finish psi: <br />Vol change cc: <br />Final gph: <br />Result: <br />Pump type: <br />Pump make: <br />COMMENTS <br />DW FIBERG <br />2.0 <br />130.0 <br />NOT NOT NOT <br />TESTED TESTED TESTED <br />PRESSURE <br />RED JACKET <br />Impact Valves Operational: YES <br />NOT <br />TESTED <br />NOT <br />TESTED <br />Printed 07/25/2006 17:35 KOHLMEYER <br />Model: MLD <br />S/N: =readable <br />NOT <br />Open time in sec: 3.00 <br />TESTED <br />Holding psi: 3 <br />Resiliency cc: 70 <br />est leak rate ml/m: 189.0 <br />Metering psi: 10 <br />Calib. leak in gph: 3.00 <br />Results: PASS <br />COMMENTS <br />DATA FOR UTS-4T ONLY: <br />Time of test 1: <br />Temperature: NOT <br />Flow rate (cfh): TESTED <br />Time of test 2: <br />Temperature: <br />Flow rate (cfh): <br />Time of test 3: <br />Temperature: <br />Flow rate (cfh): <br />COMMENTS <br />Material: <br />Diameter (in): <br />Length (ft): <br />Test psi: <br />Bleedback cc: <br />Test time (min): <br />Test 1: Start time: <br />Finish psi: <br />Vol change cc: <br />Test 2: Start time: <br />Finish psi: <br />Vol change cc: <br />Test 3: Start time: <br />Finish psi: <br />Vol change cc: <br />Final gph: <br />Result: <br />Pump type: <br />Pump make: <br />COMMENTS <br />DW FIBERG <br />2.0 <br />130.0 <br />NOT NOT NOT <br />TESTED TESTED TESTED <br />PRESSURE <br />RED JACKET <br />Impact Valves Operational: YES <br />NOT <br />TESTED <br />NOT <br />TESTED <br />Printed 07/25/2006 17:35 KOHLMEYER <br />