Laserfiche WebLink
76 Station, 1469 Hammer Lane, Stockton, CA (SR0057989) <br />5. Qualified installers must possess or work under the direct and personal supervision of an <br />individual physically present at the work site, at all times while work is being performed, <br />who possesses all of the following: <br />a. One of several permissible valid, current contractor's licenses issued by the <br />Contractors State License Board (may be issued to the installation company), and <br />b. All valid, current California UST certificates issued by the International Code <br />Council (ICC), that are applicable to the work being performed, and <br />c. A valid, current certificate of training from the manufacturer(s) of the <br />component(s) being tested, repaired, or serviced. <br />And in addition <br />d. Each person installing or testing any component must hold a certificate of <br />training from the manufacturer of that component. <br />6. Permit expires 180 days from date of approval. Note: If an extension to the expiration <br />date is required, a written request must be submitted to this office prior to the expiration <br />date. <br />7. All components must be certified by an independent testing organization and labeled as <br />required by the organization. (UL, ULC, ANSI, API, ASTM, etc. See California Code of <br />Regulations (CCR), Title 23 Chapter 16 Table B for complete list). The component must <br />bear the appropriate mark as required by the independent testing organization. <br />8. A "Certification of Installation / Modification" shall be submitted by the owner or the <br />owners' agent [pursuant to (CCR) 2635(d)] before this repair will be considered complete <br />by the EHD. <br />If you have any further questions, please contact me at (209) 468-2986, fax to (209) 468-3433 or <br />email to gbackus@sjcehd.com. <br />Thank you, <br />GarrettBackus <br />Senior Registered Environmental Health Specialist <br />Page 2 of 2 <br />