COMPLIANCE INFO_2010-2018 - Laserfiche WebLink

Home Browse Search

® Yes ❑ No* Is the audible alarm operational? Yes ❑ No* Is the visual alarm operational? M. Yes_ ❑ No* Were all sensors visually inspected;, functionally tested, and confirmed operational? Yes: -" ❑ No* Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will not interfere with their proper " Erti a<. ati 0 �,"6ration?; s [� Yes " ,❑ No* If alarms are relayed to a remote monitoring station, is all communications equipment (e.g.,,modem) operational? . ,N/A .. ®,t Yes ; JO, No* For pressurized piping systems, does the turbine automatically shut down. if the piping secondary containment monitoring system detects a leak, ❑ N/A `fails to operate, or is electrically disconnected? -1f yes: which sensors initiate positive shut -down? (Check all that apply) ®Sump/Trench =- _Sensors.;.. ® Dispenser. Containment Sensors. Did you confirm positive shut -down due to leaks and sensor failure/disconnection? ® Yes; ❑ No. ❑ Yes ❑ No* For tank systems that utilize the monitoring system as the primary tank overfill warning device (i.e., no mechanical overfill prevention valve is ® N/A installed), is the overfill warning alarm visible and audible at the tank fill point(s) and operating properly? If so, at what percent of tank capacity does the alarm trigger? Yes " ® No Was any monitoring equipment replaced? If yes, identify specific sensors, probes, or other equipment replaced and list the manufacturer name and model for all replacement parts in Section E, below: ❑Yes* ® No Was liquid found inside any secondary containment systems designed as dry systems? (Check all that apply) Q. Product;..,❑ Water. If yes, describe causes in Section E, below. ❑ Yes ` ' ❑ No* Was monitoring system set-up reviewed to ensure proper settings? Attach set up reports, if applicable ❑ Yes - . ❑ . No* Is all monitoring equipment operational per manufacturer's specifications?