Laserfiche WebLink
OPW Overfill Prevention - EVR <br />The OPW 61SO-40OC-EVR series Overfill Prevention Valves are <br />certified for installation on OPW Phase 1 EVR Systems. The <br />vapor tight EVR 61 SO's are designed to provide positive shut-off <br />of product delivery before an overfill condition occurs per EPA <br />requirements without intervention from the transport driver. The <br />valve features a sealed float pivot and a threaded lower tube <br />connection and exceeds the EVR requirement for a maximum <br />vapor leak rate of .17CFH @ 2" H2O. The 61 SO-EVR series valve <br />is installed in the base of the OPW EVR spill container with the <br />patent pending 61 JSK Jack Screw device. This configuration <br />allows liquid in the spill container to be drained directly into the <br />drop tube thereby isolating the drain valve from the tank ullage, <br />eliminating a notorious leak point in previous systems. <br />DPW 1.2100 -DI <br />Series Fill Spill <br />Container <br />DPW IDK -2100 <br />Drain Valve <br />OPW 634TT-EVR <br />Product Fill <br />Dust Cap <br />OPW 61SA-EVR <br />Series Swivel <br />Fill Adaptor <br />OPW 61JSK-4400-EVR <br />Jack Screw Drop Tube <br />Lock Down Device <br />(Patent Pending) <br />DPW 61 s0-40OC-EVR <br />Series Overfill <br />Prevention Valve <br />OPWIPOMECO <br />6111-1400-EVR Series <br />Tank Bottom <br />Protector <br />61SO Two -Point <br />The OPW 61 SO Two -Point is used for two-point fill applications, tanks <br />equipped with separate product and vapor return connections. The OPW 61 SO <br />replaces the standard fill drop tube in 3" or 4" fill riser pipes. The 61 SOM' models <br />are specially designed for compatibility with M-85 and M-100 methanol fuels. Both <br />the OPW 61 SO and 61SOM are available with sealed vapor paths for use in <br />areas where GARB requirements have been adopted. The OPW 61 SO -1000 and <br />61SO-100C (CARB) feature a groove that runs the full length of the tube to allow <br />a gauging system to share the fill riser with the overfill prevention valve. The OPW <br />61SO-490C features low flow shut-off (10 gpm) for use in areas requiring KIWA <br />approved overfill prevention valve. <br />61SOC Coaxial <br />The OPW 61SOC is used for coaxial fill applications, tanks equipped with a single <br />producttvapor return connection. The 61SOC replaces the standard coaxial fill drop <br />tube in a 4" riser fill pipe. <br />61SOP Poppeted Coaxial <br />The OPW 61 SOP is used in poppeted coaxial fill applications in areas where CARB <br />requirements have been adopted. (CARB Executive order G-70-52AN). A special <br />poppeted adaptor fitting allows the vapor return path to open only when a fill elbow is <br />connected, thus preventing fugitive emissions. <br />Integral Channel for <br />/ Gauging System <br />Apparatus <br />OPW 61SO.100C <br />Grooved Tube <br />Design for Two -Point <br />Applications with Tank <br />Gauging Probes. OPW 61SOC OPW 61SOP <br />OPW 1.2100-EVR Series <br />Spill Container <br />Vapor Rah <br />Path <br />OPt <br />or <br />WW 634TT Cap <br />OPW 633TC or <br />633TCP Adaptor <br />be <br />