Laserfiche WebLink
0 PRYCO, INC. <br />SUBBASE TANKS <br />Pryco's Subbase Tanks are designed specifically for generator set mounting. The physical size of <br />each depends upon the foot print of the gen set and required capacity. Subbase Tanks are <br />available in a Standard or a U/L Listed design. Each has the following characteristics: <br />• Heavy Gauge Steel - 7 -gauge for the top and side channels; 12 -gauge for bottom, ends, and <br />internal baffles. <br />• Internal Structural Baffles - located every mounting point and a hot/cold fuel separation baffle. <br />• Drain - 3/8" in tanks up to 200 gallons and 1" in 200+ gallon tanks. <br />• Connections - (1 ea.) 1'/2' for fuel level gauge; (2 ea.) 2" NPT for lockable fill cap and for vent; <br />and (2 ea.) 1/2" for engine suction and for engine return. <br />• Welded by Certified Welders and Tested to 5psi. <br />• Finish - Primer and choice of industrial color enamel. <br />Standard or U/L Listed Subbase may be fitted with Double -Wall ("Secondary Containment") <br />construction. Custom designed tanks can accommodate large capacity Double Wall and Rupture <br />Basin requirements. <br />U/L Listed Subbase Tanks have additional sized vents for the tank and the double wall area, if <br />present. U/L Listed Sub -Base Tanks are restricted to: Width cannot exceed 82" — Height cannot <br />exceed 30" and Capacity - 2000 gallons or less. <br />Consult factory for dimensions and pricing. <br />SUBBASE <br />Option <br />Description <br />503 <br />LOW FUEL LEVEL ALARM - Separate <br />535 <br />float switch activates red light <br />504 <br />HEAVY DUTY SOCKET and RELAY for <br />537 <br />Option #503 (3 amp. relay, dry contacts) <br />LOW FUEL LEVEL SWITCH - Separate <br />505 <br />float switch for remote annunciator only. <br />507 <br />HIGH FUEL LEVEL ALARM - Separate <br />float switch activates red light. <br />508 <br />HEAVY DUTY SOCKET and RELAY for <br />Option #505 (3 amp. relay, dry contacts) <br />509 <br />HIGH FUEL LEVEL SWITCH - Separate <br />509RB <br />LEAK DETECTOR SWITCH - Rupture <br />595 <br />Basin or Double Wall (3 amp., dry <br />530 <br />2" RAISED MANUAL FILL - with <br />lockable cap, 8" high (ships loose). <br />531 <br />EXTRA FITTING through double wall (up <br />to 2") <br />ADDITIONAL SET of GEN -SET <br />532 <br />MOUNTING HOLES (over 3 sets). <br />MOUNTING RAILS to bolt gen-set to <br />533 <br />wider tanks <br />534 <br />"BOLT -ON" END for stub up (not for <br />OPTIONS <br />)pfion <br />Description <br />535 <br />"BOLT -ON" EXPANDED METAL END <br />536 <br />GENERATOR SET MOUNTING - up to <br />537 <br />ISOLATOR PADS - attached at each <br />mounting point to receive spring isolators <br />540 <br />ENCLOSURE – For Level Sensors (Used <br />544 <br />ENCLOSURE – For Control Panel (Used <br />Primarily for Day Tank versions) <br />LEAK DETECTOR FOR DOUBLE WALL <br />TANKS WITH PUMP AND MOTOR (Day <br />Tank Version of Sub -base) - A sensor <br />within the Double Wall containment area <br />595 <br />that upon detection of a leak will turn on a <br />red alarm light on control panel and will <br />shut down pump motor. Includes dry <br />terminal contacts for connection of cus- <br />tomer supplied device up to 15 amp. <br />LEAK DETECTOR FOR DOUBLE WALL <br />MANUAL TANKS — A sensor within the <br />Double Wall containment area that upon <br />595M <br />detection of a leak will turn on a red alarm <br />light on control panel. Includes dry termi- <br />nal contacts for connection of customer <br />supplied device up to 15 amp. <br />P.O. Box 108, Mechanicsburg, IL 62545 (Phone -217-364/4467 Fax -217-364/4494) Page 9 <br />The content of'this catalog is subject to change without notification. <br />