Laserfiche WebLink
0 <br />0 PRYCO, INC. <br />MECHANICAL OPTIONS (Continued) <br />DUPLEX PUMPS & MOTORS <br />Option <br />Description <br />.- <br />Code <br />MOTOR STARTER - 3 PH, 130 watt control transformer and heater. Motor Starters and Control <br />42 <br />427 <br />DUPLEX (Second Standard) PUMP and MOTOR ASSEMBLY — A second 2 GPM pump, a <br />443 <br />Thermal Protected motor (1/3 HP, 115vac, 1 PH, 60 Hz) and a second float switch. <br />463 <br />The first pump -motor (always the "lead") begins operating at 86% of usable fuel capacity; the <br />second pump -motor (always the "lag") begins operating to assist the lead pump when fuel <br />464 <br />drops to 82% of usable fuel capacity. Both pump -motors shut off at 100% capacity. <br />427A <br />AUTOMATIC TRANSFER SWITCH — A switching system to automatically alternate each <br />pump -motor (of option #427) into the lead starting position. (At the 82% and lower levels, both <br />will operate.) Includes: Option # 427, a pump "RUN -OFF -AUTO" mode selector switch, and a <br />"Pump Running" amber light for each pump -motor <br />427B <br />MANUAL TRANSFER — A switching system to manually alternate each pump -motor (of op- <br />tion 427) into the lead starting position. (At the 82% and lower levels, both will operate.) <br />Includes: Option #427, a manual transfer switch, and a motor run-time meter included for <br />each pump -motor. <br />HAND PUMPS <br />Option <br />Description <br />Code <br />461 HAND PUMP, PISTON TYPE — 5 strokes per gallon; Equipped with TFE piston <br />cups; Operating temperature of -25° to 200°F; Dual Action—Dispenses on each <br />stroke; and, Self -priming w/up to 20 ft of lift. Hand pump check valve and motor <br />pump check valve included. <br />462 HAND PUMP, ROTARY - High flow (10 rotations per gallon; 2 per liter); All cast <br />-iron housing with stainless steel shaft & strainer; Malleable iron pump handle <br />with rotating grip for ease of use; Self-adjusting spring-loaded carbon vanes give <br />smooth operation; Internal check valve allows immediate dispensing; Built-in <br />stainless steel strainer. Hand pump check valve and motor pump check valve <br />included. <br />OTHER ITEMS <br />Option <br />Code <br />Description <br />442 <br />MOTOR STARTER - 3 PH, 130 watt control transformer and heater. Motor Starters and Control <br />Transformers are included with all 3 -Phase motors. <br />443 <br />MOTOR STARTER -1 PH <br />463 <br />STANDARD PUMP and MOTOR — A coupled 2 GPM bronze pump (Option # 402) and a 1/3 HP, <br />120 vac, 1 PH, 60 Hz motor (Option #414) purchased separately <br />464 <br />PIPE STEM — (set of two) for engine suction and return <br />465 <br />ENCLOSED INDUSTRIAL CONTROL PANEL — A heavy gauge steel <br />enclosure that meets U/L requirements (Label #508). Only U/L Listed <br />components are used within. These components the make up various day <br />4P <br />tank accessories include: contactors, relays, sockets, lights, and switches, <br />even the wire and connectors. <br />P.O. Box 108, Mechanicsburg, IL 62545 (Phone -217-364/4467 Fax -217-364/4494) Page 29 <br />The content of'this catalog is subject to change without notification. <br />